Just get a bunch of 4x4 net lights and build a cone shape with them. I guess at some point toward the top you would have to switch to something else but the bulk of it could be handled that way. Or you could use the light fabric method that I saw on this forum somewhere.
Mudsculpter wrote:Just get a bunch of 4x4 net lights and build a cone shape with them. I guess at some point toward the top you would have to switch to something else but the bulk of it could be handled that way. Or you could use the light fabric method that I saw on this forum somewhere.
now that you mention it, i remember seeing that. that could be useful. basically create the tree and then attach the wires. i was looking to make it look like a regular mega tree but control the lights in sections, but this would be a lot easier. i'll have to think about this one.
stempile is the one with the "light fabric" idea
found here:
http://www.doityourselfchristmas.com/forum/viewtopic.php?t=1971
(about halfway down is a how-to type video)
here's a link to the tree posted on the PC site:
http://www.winterlandinc.com/movies/Silver Dollar City tree.wmv
the one in dallas only had clear lights. this one has several colors and is MUCH COOLER!!
I have seen trees that go around and others that go up and down. I have not seen any that do both nor have I seen a tree like you describe. The closest thing I have seen like that is a flat tree that was setup like a triangular screen filled with pixels.
http://www.theultimatetree.com/
