So I am planning out our next display. The plans are to have two Mega Trees. I am wondering how many strands of lights are enough? The trees will be less than 30' tall. I will be using 150 ct strings and they will set the final height of the trees. So the real question is, will 24 strands be enough? or should I go to 32 or more? Now this is only strands not channels. I have not decided on 2 or 3 color yet.
You should look good with 24. My second incarnation @ 30ft had 24 strands going down, and it looked nice!! You cal also put "2" strands per channel which would mean 48 (and that fills it in better)
A 30'f mega tree has a base width of about 15'. distance around the base would then be 47'. So, 24 strands would put one strand every 2 feet.
My preference is for every 4-6 inces....
This is another question where there s no real single answer. The answer to the question depends on your preferences. My tree is 14 feet high has a base diameter of about 8 feet and I have 32 sets of lights going around the tree at a distance of about 7 inches. I use 2 sets per channel. It looks good in my opinion.
I had a 20' tree this year, had 20 strands on it.. Not enough and too much spacing between them. It still looked pretty cool though. This year I'm going to 48.
If you are animating it (which I assume), to get smoother transitions between spinning effects, you'd want more lights closer together.
Yeah, definately no single answer, but some geometry would help you figure some spacing to start.
a^2 + b^2 = c^2 🙂
