Mega Tree Help
 
Notifications
Clear all

Mega Tree Help

15 Posts
7 Users
0 Reactions
6,481 Views
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

You say you changed controllers and the problem persisted, so there are only two possibilities. Wrong setup in your player/sequencer, or bad pixels.

The test patterns on the E682 work really well. Choose the pattern (from the drop-down list), then activate. This will point out where your failing real fast.

Don't forget to return the test pattern to "none" and activate it once you are done.

E682 Test Pattern 1

Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

One other thing - put 2 strands that are known good and working into the controller spots where the current ones aren't working (with power removed, of course - SanDevices can be finicky when plugging in strands with power still there). If the problem is still there, it's your controller. If it's gone, it's your pixels and/or pigtail connection.

When you say you have tested the strands and they are working - how did you test them and how do you know they are working?


Reply
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

Ok this is more then likely not make any sense and I am super confused now.
If I take any working strand from me tree and plug into either one of the ports I get the something so you would think that would be the controller.

If I take a test strand I have that I use to test the controller ports out there and plug that in it works just fine. I am not sure how to explain this any different it.
it just will not light the whole strand that is on the tree in those 2 ports but a strand not on the tree it works fine


Reply
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

This is my first year so I am not sure what you are asking about


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
MikeKrebs wrote:Here is my guess...those two strands are newer than the other strands? Have you tried changing the reset timing? What is yours set at?

Does ver. 4.081 support timing selection ?

This is definitely an odd problem . If none of the strings on the tree work on those 2 ports , yet he says test strings unmounted work fine .

Strange issue 4 sure.


Reply
Page 2 / 3
Share: