Harbor Freight has some ok prices on cable too (if you don't want to go the ebay route). Check back where their rope section is.
From their website:
3mm x 100ft - $9.99
3/16" x 50ft - $9.99
Pricey if you compare it to the ebay guy though.
dnesci wrote:I'm building a 12' mega tree and am wondering what gauge would be appropriate for the guy wires. I was leaning to 3/32" but didn't know if that was a little light. I will be using three wires at 6' and at 12'.Thanks for your input.
Don
At 12 feet I wouldn't worry about guy wires. I use 10' 3" PVC held up with three T fenceposts. I string my 4 colors together and fasten to the top and then use a lawn staple to the ground. I put it up, go out once 2 days later and tighten them all after they have evened out and that's it. With 24 sets of 4 wires it would take a lot to take this thing down.
Most of his wire rope is galvanized, so corrosion shouldn't be a big problem. He also has Stainless Steel cable for sale............
DennyMo wrote:Thanks for the link to this vendor, nice looking prices. I'm going to pick up some of his 1/16" coated wire rope and thimbles. Questions:
- To clamp the rope around the thimbles, do I need to remove the vinyl coating where the sleeve gets clamped on?
- If so, how do I protect the assembly and inner cable from corrosion?
So, how does everyone tension the guy wires? Pull taut and use turnbuckles?
CrazyG wrote:So, how does everyone tension the guy wires? Pull taut and use turnbuckles?
Yep, that is what I use.
I just used some rope last year. My tree was about 12 ft tall Ans just secured it be four lines from the top. I will not say it was the best but it did not fall over with 32 strands on it!!
For my 10ft tree last year I found some 14ft racheting straps in green and they worked great and looked great. This year I'm going to 16ft and will still use the 14ft racheting straps at the 10ft level, but with 64 strings of lights from the top down I'm not planning to use another guy wire at the top. But if I change my mind I have a bunch of green vinyl coated cable I can add for going to the very top.
thanks for the info...
