XmasInGalt wrote:The top was very simplistic. I used cup hooks and reshaped them as shown in the picture. The pole on top was from a old broom handle that I cut. A plastic globe with a modified 4 color light string fit over the broom handle. I put 48 light strings over the top and didn't have any problems (at least until I took it down. I took awhile to seperate the light strings). I won't be using this method in '09 as my tree will grow from 14' in 2008 to 22' in 2009.
Seeing the hooks, I'm a little confused. Did you use the up and over approach with a single string/connected strings or did you go from base, up to a hook and back to the ground?
If up and over, were the hooks basically used to keep things aligned?
Thanks for the pics!
I started from the base of the tree with the male plug end and went over the pole between the hooks and back down to the opposite side. If I had extra string after I reached the bottom of the opposite side, I would go back up until I ran out of string. The hooks were to keep the strings from sliding off the pole.
Ah, got it! I think I'm going to do something like that.
My original idea was the 1/2 mega tree concept. Does anyone have any video examples of doing a 1/2 tree?
I guess what I'm worried about it fullness. I'm only using 6 channels/color (3). I'm going to use two strings per channel, so maybe I could go up and down the tree then return with another string with a gap between.
I guess I'll have to hook up a couple of strings to the controller and see what it looks like.
djulien wrote:If you didn't need all the colors simultaneously, you could "bank select" them - that is, use relays to turn on one color at a time, and SSRs to turn on or dim the individual strands. I did that this year and it seemed to work okay (but limited to 1 color at a time). I had red, green, blue, white, 12 strands each, and used 14 channels to control them.don
Are you able to drive the relays with an SSR? Any issues? That's a slick idea.
davidn70 wrote:Are you able to drive the relays with an SSR? Any issues? That's a slick idea.
Yes, relays can be driven directly from an SSR. There are a couple of ways to do this:
1. use a relay with a low-voltage DC coil, and drive it from a DC SSR (using PWM)
2. use a relay with a 120V AC coil, and drive it from a regular AC SSR; use PWM or a C7/C9 across the coil
Normally, PWM is needed in order to keep the relay coil on (since the load is not enough to latch the triac). In lieu of that, a single C7 or C9 can be placed across the coil, so there is enough load that the triac will stay on. This is the approach that I ended up using for 2008, since the relays were spread out across the yard and I did not want to go back reflash all my PICs (last-minute design change).
These ideas came from other forum members, so I can't take credit for them.
Attached is an ExpressPCB schematic that shows how I hooked it up. I used this setup (or slight variations thereof) for about half the display, giving me the equivalent of 200 channels using 112 SSRs.
The only limitations to using the relays are that they are on or off (so you don't get dimming), they make a "click" sound, they won't respond as quickly as solid-state devices (so you can't turn them on/off too frequently), and they do not place enough load on the triac to keep it latched (so you either need to use PWM or just place a small additional load like a C7 or C9 in parallel). Of course, you could still use SSRs in place of the relays if you want dimming or "bank blending".
In addition, I used double-throw relays to get either-or "bank select" behavior and reduce the number of relays (1 used 2 relays as a 1-of-4 decoder rather than 4 separate relays), although you could use double the number of
single-throw relays and be able to turn each bank on or off independently of the others.
[EDIT] I finally wrote up what I did. It is at http://downloads.eshepherdsoflight.com/Howidid-MidiTree.pdf . There is a section (trying to) explain the wiring, connection to SSRs, etc.
don
What I tried last year for this idea that worked nicely was to simply go end over end.Start at the bottom of the gage and go over the top (Like a led tree)..ALtho I don't think this will stop the GFI problems people are having.Simple dielectric grease will..It's mist getting into the GFI outlet itself that is causing it to trip.Simple fact as I reported earlier.Dielectric grease stopped this problem for me..Simply coat the end of the plug and it works great. Totaly water proof..
Enjoy..
Joe..
