Superfreak3 wrote:I bet I'm not the only one looking ahead already, but here goes.Anyway, let's proceed under the idea of a half "Mega" tree. I quote Mega because I'm only planning on making it 7 - 9 feet high.
Now, what amount of light strings, approximately, would I need to make it look decent.
Mine is made frm one 3" 10' PVC. I wrapped 4 colors, Clear, Green Blue and Red into one string and put 12 of them arond the tree. So 4 Colors, 12 strings, 48 Channels. It looks decent, that's all. next year I plan to double the count.
I fasten them to the top of the PVC, raise it up and just pull the strings out taught. I use 3 5' T fenceposts driven about 2' into the ground and put 5" plumber clamps around it. No guy wires. Use some left over display stakes of some type and zip tie the lights to the stake. Put them up and waited a couple days, then went out and moved the stakes out a little to get the stretch out.
I'm not sure about the "half" idea. If it was against a wall, it looks neat. A company up here puts all there's up that way, but I think if it's just air back there, it will look like "half a tree"
I think I would give up the channels to make them go all the way around so you can get the spinning effect.
Just my opinion.
I know the 1/2 tree might not be the best, but I don't know that I can give up the extra channels.
With the half tree I'm planning 8-10' in height. 6 strings each of Red, Green and White. I'll use the inverted V hanging method with separation at the bottom for each string to make it look a bit fuller. So there would 3 strings of each color in a qtr of the tree.
I might also double up and make it two strings per channel, but I don't know what that would get me in overall effect. I guess I could put the other string from the same channel directly opposite the channel's other string. I can envision that giving me a spinning type effect.
So, I'm currently looking at 18 channels (1 or 2 strings per channel). If I go the full circle, and not with the opposing strings method from above, that's 36 of my 48 channels for next year. I don't think I can do it so, for now, I'm sticking with the 1/2 circle (or opposing strings on same channel). There will be air behind the 1/2 unfortunately.
For the actual center post, I'm either going to construct something or modify an old basketball hoop standard with a water weighted base. I would just have to fashion some type of a top for this and stake the strings to the ground somehow.
There's also a big maple tree in the vicinity where I could drape the strings over a bough if I want to go real cheap 😉 . I don't see that being viable because of shifting in the wind, etc.
I'm just rambling so keep the thoughts, tips, ideas coming.
Superfreak3 wrote:I know the 1/2 tree might not be the best, but I don't know that I can give up the extra channels.
If you didn't need all the colors simultaneously, you could "bank select" them - that is, use relays to turn on one color at a time, and SSRs to turn on or dim the individual strands. I did that this year and it seemed to work okay (but limited to 1 color at a time). I had red, green, blue, white, 12 strands each, and used 14 channels to control them.
don
That sounds cool, but way over my head.
How much more money are we talking for a setup like that?
Superfreak3 wrote:That sounds cool, but way over my head.How much more money are we talking for a setup like that?
Not sure which post you were refering to .. If you were asking about the relays / bank select, relays are a few dollars each. The SSRs are whatever your regular cost is, probably a few $ per channel, plus enclosures.
don
Here's my next question that involves construction of the top of the tree...
I'm planning on going up and over the top and down to the other side with a string of lights. What I'm afraid of is the mess or hassle I might experience if one or several of the strings get toasted beyond repair. If I simply overlap the strings on top, I don't really want to have to disassemble the entire thing to replace a string hung early in the tree's construction.
What I'm looking for are some ideas that might help prevent any big hassles at showtime.
Any thoughts appreciated.
As I was typing this, it just dawned on me. If I use two strings, I could run up and down one side with one string and do the same directly opposite with the other string. That way, I guess I could just put hooks at the top like many others do. If one string goes out, I'd only have to deal with it on one side and maybe undo a couple of strings of a different color that may be sharing the same hook.
Anyhow, if anyone has any other ideas, fire away!
I set up my mega tree just how you first described it for the last two years. When a string went bad, I just ran another string of lights where the bad set is and plugged it into the SSR. You don't notice the bad set in the tree. Just remember to tag the bad string so you can easily identify it when you take down the tree.
Ah, that is a slick trick!
I may have mentioned earlier that my mega tree is not going to be all that mega. It's going to be about 8-10 feet tall.
I have yet to determine the height as I want to figure, based on the length of the strings I'm using how they will evenly run up and down the other side (and possibly back again).
XmasInGalt wrote:I set up my mega tree just how you first described it for the last two years. When a string went bad, I just ran another string of lights where the bad set is and plugged it into the SSR. You don't notice the bad set in the tree. Just remember to tag the bad string so you can easily identify it when you take down the tree.
Also, what did your mega tree top look like to accomodate the up and over of the strings? What material did you use? Could you post a photo? Did you use hooks as others do?
The top was very simplistic. I used cup hooks and reshaped them as shown in the picture. The pole on top was from a old broom handle that I cut. A plastic globe with a modified 4 color light string fit over the broom handle. I put 48 light strings over the top and didn't have any problems (at least until I took it down. I took awhile to seperate the light strings). I won't be using this method in '09 as my tree will grow from 14' in 2008 to 22' in 2009.


