"Mega" Tree for 200...
 
Notifications
Clear all

"Mega" Tree for 2009...

27 Posts
10 Users
0 Reactions
12.8 K Views
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago
[#5432]

I bet I'm not the only one looking ahead already, but here goes.

Next year, I want to do what amounts to a half "Mega" tree, in that it will be situated against a fenc so there is no need for a back facing side to be done with lights. However, in thinking about that, its just a regular picket fence so I could string the lights to the ground right over the fence for the back side.

Anyway, let's proceed under the idea of a half "Mega" tree. I quote Mega because I'm only planning on making it 7 - 9 feet high.

Now, what amount of light strings, approximately, would I need to make it look decent. I'm wondering how I should string the lights. Should I take a string up one side and down the direct opposite side or should I double it back to the ground so one string would go from top to bottom on the same side?

I just need to get some ideas on, well, how to build this half tree. I'm just going to use a metal pole and a fashioned bracket at the top and use 1/2 ring at the base or maybe just stake the strings to the ground in some way.

I know this is a crude explanation of what I'm looking for, but any suggestions (# of strings on your tree, its height, etc) would be greatly appreciated.

I could then use some math to get in the ballpark 🙂


26 Replies
Mufassa
Posts: 168
(@mufassa)
Estimable Member
Joined: 19 years ago

Mine this year is 10' with 24 strands of Green and White (48 total). I doubled back on the same side of the tree. I figured if you run to the other side you have less control of the animations you can do. You could never do a split color tree. Also you would have issue with that if you go with the half tree I would think.

I used a ring around the bottom held off the ground with the PVC pipe stakes on Clip T's. Working good so far.

As for next year. I am planning 3 color ~15'. I am going to do the double ring so I can get a bottom and trunk look. I figured the 24' strands going once from top to bottom plus over and down the trunk will be about right at ~15' or so.


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

How many channels did this year's configuration use up for you? Is it basically 1 string/channel? This was the first year for my display and I only have 24 channels. I do have a v3 Ren24 board to build that I plan on using for next year so I'll have 48 channels total.

I know some of the stuff is a matter of personal preference, but I wonder how many strings of lights (of one color throughout the whole 1/2 tree) would make an 8 footer look full in that particular color. As stated, I'll have a channel budget of 48 so don't want to use a ton for the tree so I have some available for other stuff. I don't want it to look too sparse though.

Next year I'm going to decrease the amount of blowmolds used and add more lights. I hope I can get a ton of LEDs cheap after Christmas but that's for another discussion.

I can't believe I'm already sketching next year's display! Talk about an addicting hobby!


Reply
Mufassa
Posts: 168
(@mufassa)
Estimable Member
Joined: 19 years ago

Mine this year is 27 Channels. Its 12 each Green and White and 3 for the star. I couldn't find enuf red to do 3 color. I have 24 strands on 12 channels looped back so every channel is 4 lines down the tree. They are on about 5" spacing looks pretty good to me. so I can control down to about 15" swath on the tree.

Going to do the same next year just add the color Red and go to single strands. Bought more lights.

--Greg


Reply
Posts: 934
Topic starter
(@superfreak3)
Noble Member
Joined: 19 years ago

When you say you double a string back on itself, do you run it back down to the groun right over top or like an inverted V to get more light coverage (if you know what I mean)..

When you look at it, do the lights come back down like | or like ^?


Reply
Page 1 / 6
Share: