Mega tree cement ba...
 
Notifications
Clear all

Mega tree cement base help

23 Posts
15 Users
0 Reactions
11 K Views
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

Have you thought of using the "Portable Hole II"? Worked great for me here in NorCal - pretty easy to build. Kills the grass a bit but it always comes back OK.


Reply
Posts: 252
Topic starter
(@vincerules)
Reputable Member
Joined: 14 years ago
budude wrote:Have you thought of using the "Portable Hole II"? Worked great for me here in NorCal - pretty easy to build. Kills the grass a bit but it always comes back OK.

I have looked at it, but honestly I'm nervous about that. I just want to make sure the pole won't fall down because if it does it's a good chance it either breaks our big front window or lands on the neighbors cars. I saw the pull test he does though and other people have done it. It would be a better option for me if I could just get over the mental part of it and feel comfortable using it.


Reply
Posts: 612
(@n-gifford)
Honorable Member
Joined: 15 years ago

A good rule of thumb (I'm a construction superintendent in Northern California), is 4/1 (1 foot down per 4 feet up) if you're casting it in concrete. Most power and telephone poles that are just set in dirt are set at 4/1, or worst case 3/1 in less that ideal soil conditions.

With your 14' tall pole, set in concrete, I'd dig a 10"-12" diameter hole 3.5' deep and place 6" of dry concrete in the bottom before you set the sleeve. That's probably being pretty conservative, and you could definitely get away with much less if you use guy wires to help support it.


Reply
Posts: 78
(@mpurser)
Trusted Member
Joined: 16 years ago
n_gifford wrote:A good rule of thumb (I'm a construction superintendent in Northern California), is 4/1 (1 foot down per 4 feet up) if you're casting it in concrete. Most power and telephone poles that are just set in dirt are set at 4/1, or worst case 3/1 in less that ideal soil conditions.

With your 14' tall pole, set in concrete, I'd dig a 10"-12" diameter hole 3.5' deep and place 6" of dry concrete in the bottom before you set the sleeve. That's probably being pretty conservative, and you could definitely get away with much less if you use guy wires to help support it.

while mine is not in the ground my tree is 20 foot tall with its star in place i use a portable hole.have had no problims with it in the 3 years i ve used it i do use guy wires i move it when the seasons over

portable hole with transporter

Reply
Posts: 60
 kjjk
(@kjjk)
Trusted Member
Joined: 15 years ago

man this is a great idea, i might do this for my tree for 2015 christmas year light show.


Reply
Page 2 / 5
Share: