deonb wrote:b) How do I power this guy? The tree will have 16000 pixels (250 x 64).
Use 750W HP Server Power Supplies. Check E-Bay for Hp Proliant Power Supply 750W.
Buy a breakout board for each power supply. A nice feature of this is that the edge connector allows a bad power supply to be slid out and easily replaced. You'll also need to buy some EVGA connectors.
Section your tree into strips of 4 x 250. Each section requires 720 watts at full power so 1 power supply per section. You have 64 sections so 64 / 4 = 16 sections / 16 power supplies / 16 breakout boards. Each power supply would have 8 pigtails, with the last one having 9 in order to inject at end of the last string.
House multiple power supplies in a larger bud box. If you don't mind having 16 enclosures then a modified jdeation compact case will fit the power supply, pigtails and a couple of fused distribution boards. I use one of these for my 800 pixel tree plus star.
deonb wrote:i) Use 12v pixels, which will require 9600 watts of power. This will mean mean 32x 300W power supplies. Practically how would I even do that?
Yes, use 12v Pixels so you don't have to inject so often. That would save a lot of money and materials. It also presents less risk with fewer failure points.
Using 5v pixels, you'll need power at the end, beginning and in 2 places in between (at pixel 100 & pixel 200)
Using 12v pixels, you'll need power at the end, beginning and in 1 place in between (at pixel 100)
dcamron wrote:Use 750W HP Server Power Supplies. Check E-Bay for Hp Proliant Power Supply 750W.Buy a breakout board for each power supply. A nice feature of this is that the edge connector allows a bad power supply to be slid out and easily replaced. You'll also need to buy some EVGA connectors.
I'm glad I saw this post. I have been planning on using 350-500W pc power supplies for power and injections since I have so many of them available to me and I can pull both 5V and 12V from them. I happen to have 20-30 of these HP power supplies (750-1200W) from older servers sitting in storage which I hadn't even thought of using (plus I know a guy at an e-recycling center that can probably get me as many as I want). Thank you for posting the link to the breakout boards. If I have 1 on each side of the house and 1 in the middle, I can supply all the pixel light power attached to the house I will probably ever need. Then I can box a few in the yard for the mega-tree and props.
