Which profile is be...
 
Notifications
Clear all

Which profile is better?

10 Posts
9 Users
0 Reactions
8,312 Views
Posts: 1
Topic starter
(@harrinj)
New Member
Joined: 10 years ago
[#50375]

I built a 37-Foot mega tree in 2008 (the only year I displayed) that was 360 degree. Now that I’m considering getting back into this, I’m hearing that 360 degree mega trees don’t make sense. SO what’s re the majority of people using - 180, 270 or 360 degree trees?

JD


9 Replies
Posts: 242
(@hockeyhunter1956)
Reputable Member
Joined: 13 years ago

In my opinion, it is best determined by the angle that folks will be viewing the tree from. First year for my 30' MT. My tree sits back from the highway about 200' so anymore than 180 degree tree was going to be a waste of lights. If I had a corner lot (say a side street and a highway) I would consider something more than 180 degrees.


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

Viewing angle, content you plan to use, and method that you plan on mounting the pixels are all variables that should be considered.

Viewing angle is pretty much self-explanatory. Where can people see your tree from? A 180 tree may not be enough if they can see both sides as they move through your area. In our case, sitting 30 feet from the road, a 270 degree tree seems to be the best.

Your mounting method plays a part in the fact that some mounting methods can see "through" the tree and the pixels from the back can be seen from the front (or side to side). We have a 30 foot mega tree sitting on a peninsula in the middle of our park's lake. People can see it from all 360 degrees. We zip tied the pixels to 1/16" cables. Though we only have 16 strings (this year), it looks impressive from all angles because all 16 strings can be seen from all angles.

With our shorter trees (12 to 22 feet tall), we used Boscoyo Strips. Most of them are the black variety. With these, we cannot see (well) anything but the lights on the face of the strip. Nothing, or very little, is seen by strips on the "back side", therefore we do not populate the back 90 degrees.

Content comes into play when you can see through the trees. Images, text, etc., sometimes becomes un-readable/un-see-able because the images/text on the backside interferes with what is being presented on the front sides. Patterns sometimes actually benefit from being able to see the back strings, but not as often as you may think.

All in all, it is a matter of personal taste.

Good luck.


Reply
Posts: 344
 TSL
(@tsl)
Reputable Member
Joined: 10 years ago

My old AC light tree was 360 because you could see through it. When I switched and converted it to rgb I went with a 270 tree. The placement of the tree in my yard using the Boysco strips didn't warrant a 360 tree since you couldn't see the backside.

Sent from my iPad using Tapatalk


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

If you only have a 180 degree viewing angle, not more than 200 or 210 degree at most. I think avoiding lights behind the viewing area eliminates seeing unwanted lights behind the viewing area.


Reply
Page 1 / 2
Share: