Mega-mega pixel tre...
 
Notifications
Clear all

Mega-mega pixel trees

7 Posts
5 Users
0 Reactions
7,146 Views
Posts: 1159
Topic starter
(@deonb)
Noble Member
Joined: 13 years ago
[#50350]

I've run a 50x64 MegaTree for the last few years, and always built it out of 5v pixels stuck inside Boscoyo strips with 3" spacing. I never had to worry about power injection before - just connected each of the 64 strands into the 64 different ports of 4x E682 controllers with 5x 60A 5v power supplies hosted in 4x CG1500 boxes. Pretty simple.

However, for next year we want to go bigger and denser... We want to change pixels to 1" spacing, and also make the tree taller. So planning to go up from 50 pixels per string to 250 pixels per string.

So questions I have to the "big tree" builders out there:

a) I'm planning to use the Boscoyo rolls this time around:
https://www.boscoyostudio.com/index.php?main_page=product_info&cPath=2_6&products_id=154

Are the boscoyo strips up for the challenge of carrying 250 pixels (21') at 1" density without stretching and sagging?

b) How do I power this guy? The tree will have 16000 pixels (250 x 64). I've come up so far with these options:

i) Use 12v pixels, which will require 9600 watts of power. This will mean mean 32x 300W power supplies. Practically how would I even do that? I don't really want to put 16x CG1500's around the tree... Build a wall of power supplies somewhere else and run 64x 8AWG cables to the strands? Maybe 8/2 romex? 64x 8/2 Romex is a heck of a lot of copper to lug around...
-or-
ii) Use 5v pixels, which will require 4800 watts of power. But then I need to run 8awg wire up on the back each strip, which doesn't seem practical. Or alternatively put 8x 5v transformers in the star at the top - also not practical.
-or-
iii) Use 12v pixels with 48v buck transformers. And then put a wall full of 48v transformers in a central location (e.g. these), and a 48v to 12v buck converter on each string. So far this seems the easiest - are these kind of buck converters really waterproof enough that I won't have to put them into a housing?

Cost isn't the biggest concern, logistics and ease is.


6 Replies
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

1" spacing is overkill as far as I'm concerned. I have a 48x110 with 2" spacing. F16v3 and two expansion boards with a Meanwell RSP3000-12. No power injection, each string is on its own port.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
deonb wrote:I've run a 50x64 MegaTree for the last few years, and always built it out of 5v pixels stuck inside Boscoyo strips with 3" spacing. I never had to worry about power injection before - just connected each of the 64 strands into the 64 different ports of 4x E682 controllers with 5x 60A 5v power supplies hosted in 4x CG1500 boxes. Very easy, albeit not the cheapest way to build a tree.

However, for next year we want to go bigger and denser... We want to change pixels to 1" spacing, and also make the tree taller. So planning to go up from 50 pixels per string to 250 pixels per string.

So questions I have to the "big tree" builders out there:

a) I'm planning to use the Boscoyo rolls this time around:
https://www.boscoyostudio.com/index.php?main_page=product_info&cPath=2_6&products_id=154

Are the up for the challenge of carrying 250 pixels (21') at 1" density without stretching and sagging?

b) How do I power this guy? The tree will have 16000 pixels (250 x 64). I've come up so far with these options:

i) Use 12v pixels, which will require 9600 watts of power. This will mean mean 32x 300W power supplies. Practically how would I even do that? I don't really want to put 16x CG1500's around the tree... Build a wall of power supplies somewhere else and run 64x 8AWG cables to the strands? Maybe 8/2 romex? 64x 8/2 Romex is a heck of a lot of copper to lug around...
-or-
ii) Use 5v pixels, which will require 4800 watts of power. But then I need to run 8awg wire up on the back each strip, which doesn't seem practical. Or alternatively put 8x 5v transformers in the star at the top - also not practical.
-or-
iii) Use 12v pixels with 48v buck transformers. And then put a wall full of 48v transformers in a central location (e.g. these), and a 48v to 12v buck converter on each string. So far this seems the easiest - are these kind of buck converters really waterproof enough that I won't have to put them into a housing?

Cost isn't the biggest concern, logistics and ease is.

You would not need as much power as you think , unless you plan to run at full white with full brightness .
I have done just over 8k -5v pixels @ 15% output using the HinksPix 16 outputs and 2 meanwell 5v 60a power supplies and injected the ends only .
I had no issues, but think it was still a bit to bright .
@ 1" spacing you are still in the 20' range for your tree height , so not a lot of voltage loss in wiring .


Reply
Posts: 1159
Topic starter
(@deonb)
Noble Member
Joined: 13 years ago
uncledan wrote:1" spacing is overkill as far as I'm concerned. I have a 48x110 with 2" spacing. F16v3 and two expansion boards with a Meanwell RSP3000-12. No power injection, each string is on its own port.

Interesting. I'm actually also considering running 240V. What are you using for your 240V outlets? NEMA 6-30?


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago
deonb wrote:Interesting. I'm actually also considering running 240V. What are you using for your 240V outlets? NEMA 6-30?

I dont use outlets. Each power supply is hardwired to 20a 2 Pole GFCI circuit breaker


Reply
Page 1 / 2
Share: