Help designing a he...
 
Notifications
Clear all

Help designing a heavy Mega Tree

24 Posts
15 Users
0 Reactions
14.7 K Views
Materdaddy
Posts: 2368
Topic starter
(@materdaddy)
Famed Member
Joined: 16 years ago
[#20453]

I'm hoping to build a mega tree using 16 strands of 18' LED rope light. The center pole will be around 16'. From the reading I've done so far, I've learned the following:

Rope light trees are heavy so I need to over-build/over-engineer this tree
Rope light cannot support itself the inner wires will tear. I need to affix the rope light to something else so it doesn't pull itself apart.

To combat the latter, I plan on using some 1/8" Galvanized Aircraft Cable and zip tie the rope light to this every foot or so.

For the former, I need help. Keep in mind, my winters in SoCal are mild compared to what most of you are used to, but I still want this thing to be sturdy as heck because the last thing I want is for somebody to get hurt.

Questions:
1. How large should the entire pole be? Basically what I'm asking is how much should be underground? 18' total pole with 2' under ground? 20' total with 4' under ground? (I better get digging now to get through my clay like soil.)

2. Guy Wires? I'll have the 16 strands, but I don't plan on those being the only support. I'm thinking either 3 more wires at 16' that go to a 45° angle and probably 3 additional at 12' also at a 45° angle.

3. Center Pole Material? I know a lot of people use thin galvanized fence post pieces, but I plan on using something much heavier. Anybody know much about different metal types? Some sort of fancy DOM tubing? I have a few metal shops in the area and I might make a few calls as well as a welder buddy who will be receiving a phone call. I'm hoping I can build the center pole as two pieces with a sleeve in the bottom one so I can take it apart for storage during the rest of the year.

If all else fails, I can look at cutting the LED rope light to a shorter length and using a shorter pole. For reference this is the rope light I'll be using: http://doityourselfchristmas.com/forums/showthread.php?13769-18-LED-rope-light-for-9-99-Today-only (See the second post for a link.)


23 Replies
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago

I'm using 6 meter (20 foot) scaffold pole they are about 2 1/4" diameter and the rule we use in the UK for anything free standing post like is 1 down 4 up. So 20 foot would give me 4 ft in the ground and 16 foot above ground (this is based on being concreted in place not in soft ground).


Reply
Posts: 304
(@dennis-cherry)
Reputable Member
Joined: 19 years ago

Take a look at Walter Monkhouse "Jump Tree"

Just Google it and you will find the videos and assembly instructions.

I built one 2 years ago and put 200 lbs of lights on a 16 foot tree. I by myself, can raise and lower the tree lights. No guy wires required unless you just want to use them.

It is the best design out there bar none.


Reply
imbluenote
Posts: 1615
(@imbluenote)
Noble Member
Joined: 15 years ago
Dennis Cherry wrote:Take a look at Walter Monkhouse "Jump Tree"

Just Google it and you will find the videos and assembly instructions.

I built one 2 years ago and put 200 lbs of lights on a 16 foot tree. I by myself, can raise and lower the tree lights. No guy wires required unless you just want to use them.

It is the best design out there bar none.

I wanted to look it up...figured i would post the link.

http://www.magicchristmasnews.org/magic_christmas_news_002.htm


Reply
JasonPortwood
Posts: 753
(@jasonportwood)
Noble Member
Joined: 17 years ago

The pipe described in the JUMP pole instructions would easily hold the weight. I found it at a local electrical supply shop. Big box stores near me had the lighter stuff. It's expensive but two years and it still looks like when I bought it.


Reply
tweist
Posts: 394
(@tweist)
Reputable Member
Joined: 18 years ago

I'm going for 18' also this year and found this hardware and instructions
http://www.christmaslightshow.com/20-mega-tree-complete-kit.html
I will be hanging 128 strings on it. I have already tested the weight and it works great.
The pole is 1 1/4" gas pipe. Easy to set up and store.
Just my $.02 worth.


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

I have a 20ft sundowner style flagpole (telescoping alum.). I use 16 cables 1/16th inch galv. with eyelets on each end. I tie wrap 4 colors minis to each one. I have a ring of 3/4 pvc electrical conduit. The ring has 5 "T"s with 10" pvc holding the ring off the ground (rebar in the gound than these over it). The cables wrap around the pvc ring the pulled out and staked down with 12" tent stakes (look like pole barn nails, 3/8 x 12 nails). The lights go over the ring (not wrapped) then towards the center pole where the controllers are. 64 strings I can barely pushup by myself. I added 8 more strings to spiral and needed the wife's help after the first section. The cables act as guy wires so no others needed. The cables don't stretch. In big winds it doesn't move. 48 strings for 3 years, 64 strings 1 year, 72 strings 1 year. So this system has been in place for 5 years.

Brian


Reply
Posts: 138
(@tmcteer)
Estimable Member
Joined: 15 years ago

I used this 5 way with 1 1/4 EMT conduit for my 12' MegaTree without guy wires but anchored with 3/8 rebar thru the cross points. If you extend I suggest using guy wires and their pole pin union which is much stronger than a conduit coupler.

http://www.christmaslightshow.com/1-1-4-5-way-metal-pole-stand.html
http://www.christmaslightshow.com/pole-pin.html

of course if you have access to a welder you may save some $$

Tom


Reply
Posts: 83
(@damo1271)
Estimable Member
Joined: 16 years ago

Let me start by saying that I have no experience with building a mega tree. I have not built one, do not own one, and have no idea how heavy they can be, or how difficult they can be to put up.
With that disclaimer outlining my total ignorance on the subject (please take it easy on me in your replies) I find that all the posts I have read have a similar theme with the trees - that is a centre pole and some sort of pulley arrangement to raise the lights up. I have seen pulleys, pneumatic raising and other variances. This seems to be a great idea but i am wondering if it becomes limited when the tree gets over a certain size and is the raising up and down possibly over-complicated.

Has anyone ever built a "modular mega tree" as follows?

Note you will probably need a welder!
Use a single centre pole of suitable size, eg for very large trees around 75mm (3 inches in diameter) with a substantial wall thickness, say 2-3mm (but get proper advice on this to ensure it is strong enough). Weld flanges on the top and bottom and around the flange create brackets to hold the tree sides. The tree sides can be made from relatively light weight steel formed into a triangular section (with lightweight cross bracing for very large trees). Lights are permanently attached to the long side. The top brackets on the centre pole will allow the side to slot in. (maybe slot down from the top for ease of putting it up) The bottom brackets will bolt through the tree sides. Brackets can be placed between the outer edges of each side at their base to stop them moving.

This should be very quick to erect and very strong. You will need a hole in the gound for the centre pole, or some other means of securing it upright. Then place each of your 8, 10, or 12 sides on and bolt them in place. Brackets to keep the sides evenly spaced between each side are bolted on as you go.

Lights are fixed to the rigid side and you dont need to worry about supporting their weight. Also there is no flexing of the strings when putting up and pulling down the tree.

Storage requires storing the flat triangular sides of the tree - maybe not as compact as the pulley type mega tree as you would be storing 20 foot long steel triangles! Also you have the option of swapping out a side (keep a spare side with a ready to go light string?) by undoing a couple of bolts, the rest of the tree can remain standing. If the centre pole is strong enough and your tree tall enough to need them, you could even put rungs to allow you to reach the top to assist with assembly.

I've attached a drawing for reference to show some of the concepts i've tried to describe.

Anyway, my two cents worth from someone with no experience in this - that can be good or bad - you decide.


Reply
Keebler
Posts: 1691
(@keebler)
Noble Member
Joined: 18 years ago

the LIGHTS
last year i had 16 strands of 4 100 count mini lights (64 strands of mini lights) plus other things (ornaments, etc) - this rig had NO trouble with this load
this year i have 16 strands of pixels (or will have lol), so much less weight (i am not concened with the weight though)

the MAST
i use 2x fence poles for my center mast.
i have then bolted together (for easy disassembly) then i have a pulley welded to the top along with an EYE bolt (to attach 3 guy wires).
i have a winch welded to the base section of the pole along with 3/8" wire rope (rated to 945#) which is locked in place during the show times.
the total length of my mast is 22' with 2 in the ground.
the top of my mast has a "receiver" that allows me to quickly place my star and have it bolted in place very quickly and very securely (we have high winds especially in winter)

the HOLE
i used my power auger to drill a 2.5' foot hole then got a 2' section of 1" PVC glued a cap to the bottom along with a SCREW cap to the top.
placed the capsule int the hole with the screw cap up and filed the hole with cement.
i used the bottom section of the fence pole IN THE CAPSULE to set it and make sure it was plumb using guy wires and a couple levels.

the GUY WIRES
i use 3.
the anchors are drilled and cemented in the grass at the appropriate distance far enough below the surface to not have to worry when i mow
when i attach the guy wires (they are 3/8" wire rope with "D" links) i simply snap one to the top and then to the anchor.
i use 2 in front (33 degrees in front of the pole) and one directly in back.
the one in back is the key. i have a ratchet strap attached to the guy wire which allows me to add or remove tension to the pole based on the weight of the lights.

(I'll take pics when the sun comes up and post this afternoon)


Reply
Page 1 / 3
Share: