Yes, that is one way. Depending on your actual pixel spacing on the minitree you may be able to jump every second pixel on the way down the leg, the...
I had a similar problem when I used Renards. It turned out to be a bad zero crossing signal - Each Renard shared the same zero cross signal. As so...
I often use the 4th wire as a second ground wire.
A cheap end cap for PVC tube is plastic chair tips. They fit quite well and are very cheap, but I am not sure just how waterproof they are. I use th...
Cameras... Bah!! Audio... Pfft Try this or this - if you want something even more serious.
Yes I have found it is down as well. I noticed it around 10:00am local time and its been down since then.
Yes I haven't been able to get on there all day either.
My tree is set up with string 1 on the left and pixel 1 at the bottom as looked at from the street. Each string of 50 pixels runs up (25 pixels) and ...
I would like to ask a dumb question: what is "snakebit season"? Is this by chance a typo? Here in Australia we are going into "snake bite" season,...
would it work if you set up each row in the mega tree as an element, then did a chase over each row independently - aligning the start of row2 to the ...
Thanks for the feedback. Yes, I had version control enabled. I will try with version control disabled and see what happens.
jchuchla wrote:I don't know what a DR4 is. And that's proving to be too generic of a search term for google. Do you have any information other than ...
If you swap the set up from the second (good) tree to the problem tree and vice-versa, does the problem move (ie problem with the controller) or stay ...
