At this time of the year you might not get a D4 or D2 controller in time and you may have to problem solve the Renard serial issue. The symptoms y...
I have the same issue on my mega tree and the temperature here is nearly 30C for the last few days so probably not due to rain or snow! I'd love to ...
jeffu231 wrote:What you are trying to do will work. You need to set the color handling on each element in the group in the display setup. Doing it at ...
I have 240V strings on my mni trees and I use a Renard 64 with AC SSRs for the control. It's very simple, provides full dimming and control, and is v...
Do you have a lot of twinkle effects? I found that Vixen started crashing if I had too many, my PC wasn't up to the task of rendering them. As soon ...
Started my setup today. Hardware side done. Wiring happens tomorrow then fix up any issues on Wednesday ready to start show - hopefully.
I use heatshrink on each wire and allow about 1cm extra. I shrink it and bend the excess end back over itself and then put another piece of heatshrin...
Wow that's huge. Are you sure you didn't get inches and feet mixed up on the plans. LOL Looks awesome
If it were me, I'd run the outline pixels (150 in total) as one universe on one output. I'd then power inject every 30 pixels. I'd probably set this ...
Here's the link on Aliexpress. Unfortunately the local supplier here in Adelaide wanted $13 per meter.
I made the tubes! The Acrylic came from aliexpress. It is 15mm OD x 2mm wall. It is 1m long. It cost me about $2 per length - delivered. The WS...
Thanks. The tubes are 15mm acrylic with WS2812 LED strip inside them. I am hoping they stand up OK in our harsh summer sun.
