I used these http://www.holidaycoro.com/12mm-Pixel-Node-With-Waterproof-Connections-p/711-wp.htm along with pig tails
K-State Fan wrote:I use 100 pixel count strings for my 50 X 24 tree and use 12 ports on my controller.
How do you have each strand configured? Do you have a longer extension wire at the top between the two strands of 50 or did you do pigtails on both ends? How long are your extension cords from the strand at the bottom of the tree to your controller? Just trying to get a feel for what is pigtailed together where and how extensions are ran.
Mine is 100 per leg and two legs on a port. 100 up a leg and 100 down the next leg. Aka zig-zag. Two conductor wire soldered the 6" between legs at the top.
pmkoch wrote:How do you have each strand configured? Do you have a longer extension wire at the top between the two strands of 50 or did you do pigtails on both ends? How long are your extension cords from the strand at the bottom of the tree to your controller? Just trying to get a feel for what is pigtailed together where and how extensions are ran.
I did the same as K-State - the included pigtails on the strings are more than long enough to connect 2 strands together at the top, or you can go with 100-pixel strings and still have plenty of wire at the top. I built 5' extensions at the bottom of one strand to connect to the controller box that is mounted near the bottom of the mega tree pole. In my case, I have 2 of the 350W 12V PSUs + 1 E682 controller inside a CG-1500 case. I have the 12" or 18" pigtail going to the connector ports and held in place using cable glands and then simply connect my extension to the pigtail.
pmkoch wrote:How do you have each strand configured? Do you have a longer extension wire at the top between the two strands of 50 or did you do pigtails on both ends? How long are your extension cords from the strand at the bottom of the tree to your controller? Just trying to get a feel for what is pigtailed together where and how extensions are ran.
Configured where?
Nothing at the top besides the standard wiring between pixels.
My pixels have a 5' lead on the input side and a 6" lead on the output. I do not use the output lead
