megatree help pleas...
 
Notifications
Clear all

megatree help please

28 Posts
5 Users
0 Reactions
10.3 K Views
Posts: 15
Topic starter
(@vietnight)
Active Member
Joined: 8 years ago
[#51948]

Hi guys,
I am new first time setup megatree.

I have two nodemcu running ESPixelStick, one string of 400 pixel, 8 strands per string.

trying to setup xlights but it didn't come out right, can anyone tell me what i did wrong?

megatree wiring
http://doityourselfchristmas.com/forums/attachment.php?attachmentid=42393&stc=1&d=1576553912

xlights network setup
http://doityourselfchristmas.com/forums/attachment.php?attachmentid=42394&stc=1&d=1576553920

xlights layout
http://doityourselfchristmas.com/forums/attachment.php?attachmentid=42395&stc=1&d=1576553928

megatree wiring
xlights network
xlights layout

27 Replies
Posts: 409
(@dim-bulb)
Reputable Member
Joined: 9 years ago

First, you need to change the nodemcu's to multicast, then set up your xlights as one output for your mega tree, then set each mcu, first one set number of pixels as 400, start channel 1, second mcu as 400 pixels start channel 1201. Then set your tree in layout as 180 tree, 16 strands 50 pixels per strand


Reply
Posts: 43
(@evomoto)
Trusted Member
Joined: 8 years ago
vietnight wrote:Hi guys,
I am new first time setup megatree.

I have two nodemcu running ESPixelStick, one string of 400 pixel, 8 strands per string.

trying to setup xlights but it didn't come out right, can anyone tell me what i did wrong?

megatree wiring
http://doityourselfchristmas.com/forums/attachment.php?attachmentid=42393&stc=1&d=1576553912

xlights network setup
http://doityourselfchristmas.com/forums/attachment.php?attachmentid=42394&stc=1&d=1576553920

xlights layout
http://doityourselfchristmas.com/forums/attachment.php?attachmentid=42395&stc=1&d=1576553928

1. Why is your xLight/Vixen/FPP Mapping says Channels 1 to 1530 for #1 and 1531 to 3060 on #2?
It should be "Channels 1 to 1200" for #1 and "Channels 1201 to 2401" for the #2 (400 pixels times 3 channels per pixel is 1200 channels. Not 1530 )

2. Please take a screenshot from ESPixelStick device setup.

My wiring is the same *2 , but I also have power injections.

Thanks,


Reply
Posts: 15
Topic starter
(@vietnight)
Active Member
Joined: 8 years ago
EvoMoto wrote:1. Why is your xLight/Vixen/FPP Mapping says Channels 1 to 1530 for #1 and 1531 to 3060 on #2?
It should be "Channels 1 to 1200" for #1 and "Channels 1201 to 2401" for the #2 (400 pixels times 3 channels per pixel is 1200 channels. Not 1530 )

2. Please take a screenshot from ESPixelStick device setup.

My wiring is the same *2 , but I also have power injections.

Thanks,

EvoMoto wrote:1. Why is your xLight/Vixen/FPP Mapping says Channels 1 to 1530 for #1 and 1531 to 3060 on #2?
It should be "Channels 1 to 1200" for #1 and "Channels 1201 to 2401" for the #2 (400 pixels times 3 channels per pixel is 1200 channels. Not 1530 )

2. Please take a screenshot from ESPixelStick device setup.

My wiring is the same *2 , but I also have power injections.

Thanks,

hi thank you for the help,
1. xlights setup at start universe#1, # of universe is 3 that why is show 1-1530, and 1531 to 3060 is on #2, i left the default at 510 that why is 1530, if i change to 400 then is 1200 for #1 and 1202-2800 for #2
xlights network e131 setup

ESPixelStick screenshot of 1 and 2

i have power injections at 100 pixel right now but when i get it to work i will do power injection at 50 pixel.


Reply
Posts: 15
Topic starter
(@vietnight)
Active Member
Joined: 8 years ago

Output of the tree is not in order and missing pixels.

Sent from my SM-N975U using Tapatalk


Reply
Page 1 / 6
Share: