First Mega Tree Que...
 
Notifications
Clear all

First Mega Tree Questions

27 Posts
11 Users
0 Reactions
10.1 K Views
Posts: 61
Topic starter
(@pmkoch)
Trusted Member
Joined: 9 years ago
[#52038]

I am planning out my first mega tree for next year and have some questions. I plan on going with a 180° 16 strand 50 node tree. I will using the pixel mounting strips at 2” spacing. I will also be using the Boscoyo 32 topper(8.75” diameter) with a 6’ diameter base(I am unsure what I will use for this but bent EMT seeks popular?). The spot where the tree will go is not level so I need to figure out how to suspend it a bit, ideas on this? My other question is what pole should I go with? I think I’m going with the portable hole but will I need to go with a full blown ASAP pole or will I be okay just using a single 1-1/2” rigid electrical conduit that is 10’ long?

My last question is how is everyone mounting stars on top of their tree? Is that something else I need to take into consideration?


26 Replies
Posts: 344
 TSL
(@tsl)
Reputable Member
Joined: 10 years ago

I use 2 1/2” EMT conduit.my tree is 20’ high. My base is treated deck boards in an X. I use cable guy wires to hold it up 3 half way up and three on at the top. 6 screw-in ground stakes from Home Depot to attach the guy wires to. My ground is not level either. I use cut pieces of 2x4’s to level it.its solid as a rock.

Sent from my iPhone using Tapatalk


Reply
Posts: 61
Topic starter
(@pmkoch)
Trusted Member
Joined: 9 years ago

Are your strips attached directly to the ground on the bottom? Or is that what used 2-1/2” EMT for?


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
pmkoch wrote:...........will I be okay just using a single 1-1/2” rigid electrical conduit that is 10’ long?

You are fine with 1-1/2 EMT for the first 10 feet, but 50 pixels at 2” is more like 14-15 feet. Similar to you, I did a 200 degree, 20 strand, 50 pixel at 2” spacing. I used 1-1/2, then inserted a piece of 1-1/4 into the 1-1/2 then set the length. Drilled and added 2 sheet metal screws to hold the length.

Mine is free standing using 1/2 ent to build legs and braces. 8-90 bends for the feet. I did 8’ diameter
Straps are attached with bungees to 8’ ring like base.


Reply
Posts: 61
Topic starter
(@pmkoch)
Trusted Member
Joined: 9 years ago

After more digging it seems like going with the Holiday Coro QuickTree topper(QT8) with a 10’ 1-3/8” top fence rail in the portable hole would be quick and easy, thoughts?


Reply
Page 1 / 6
Share: