First Mega Tree Que...
 
Notifications
Clear all

First Mega Tree Questions

27 Posts
11 Users
0 Reactions
10.2 K Views
Posts: 61
Topic starter
(@pmkoch)
Trusted Member
Joined: 9 years ago

I think I have the tree itself worked out now. Now on to wiring questions! I plan on going with 800(50x16) 12v pixels. I will be going with a 16 port controller(undecided on which exactly). What kind of pigtails/extensions will I want to go with? I’m hoping I can run 2 50 pixels strands together off one controller port without doing power injection, only using 8 ports on the controller. In that case, do I want to put pigtails on both sides of each 50 pixel strand and then at the top just plug the pigtails together? Is there a better way to wire them?

I’m hoping to get a solid plan for pixels, pigtails and extensions so I can do one large order from overseas and not come up short handed.


Reply
Posts: 344
 TSL
(@tsl)
Reputable Member
Joined: 10 years ago
pmkoch wrote:I think I have the tree itself worked out now. Now on to wiring questions! I plan on going with 800(50x16) 12v pixels. I will be going with a 16 port controller(undecided on which exactly).

You have many choices with controllers. Take a look at all of them and see what best fits your needs.

What kind of pigtails/extensions will I want to go with?

Xconnect is becoming the “standard”. Mine are all Ray Wu connectors. No issues with them.

I’m hoping I can run 2 50 pixels strands together off one controller port without doing power injection, only using 8 ports on the controller. In that case, do I want to put pigtails on both sides of each 50 pixel strand and then at the top just plug the pigtails together?

I would. I think they’re easier to handle. But it’s a preference thing. Mine are connected at the top with pigtails but I have 16’ strips with 92 pixels in each strand.

Is there a better way to wire them?

If there’s one way there’s a hundred different ways.

I’m hoping to get a solid plan for pixels, pigtails and extensions so I can do one large order from overseas and not come up short handed.

Take a look at DIY LED Express. They are in Wisconsin and their prices aren’t much more than going overseas.

Hope this helps.

Sent from my iPhone using Tapatalk


Reply
Posts: 205
(@barlav)
Estimable Member
Joined: 11 years ago

I have a tree similar to the one you're building: http://doityourselfchristmas.com/forums/showthread.php?42817-2016-Mega-Tree-With-Public-Remote-Control
I did not use a genuine portable hole or ASAP pole first year but wish I did. I rebuilt properly for second year and have had zero issues since. My advice would be to build it strong and right the first time. Much easier setup and super sturdy (especially in volatile climates like mine).

I use a star that is mounted on a pole thinner than my center pole so I can insert it in the center pole and hold it in place with a cotter pin.


Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago
pmkoch wrote:I think I have the tree itself worked out now. Now on to wiring questions! I plan on going with 800(50x16) 12v pixels. I will be going with a 16 port controller(undecided on which exactly). What kind of pigtails/extensions will I want to go with? I’m hoping I can run 2 50 pixels strands together off one controller port without doing power injection, only using 8 ports on the controller. In that case, do I want to put pigtails on both sides of each 50 pixel strand and then at the top just plug the pigtails together? Is there a better way to wire them?

I’m hoping to get a solid plan for pixels, pigtails and extensions so I can do one large order from overseas and not come up short handed.

I use 100 pixel count strings for my 50 X 24 tree and use 12 ports on my controller.


Reply
Posts: 61
Topic starter
(@pmkoch)
Trusted Member
Joined: 9 years ago

I checked them out but they don't have much in stock. No 12v WS2811 bullets from what I can see.


Reply
Page 4 / 6
Share: