Boyosco Mega Tree Q...
 
Notifications
Clear all

Boyosco Mega Tree Question

63 Posts
25 Users
0 Reactions
33.1 K Views
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

I use the Delphi Weatherpacks also and I've never had a issue. I bought the crimping tool and the removal tool. You have to be careful which removal tool you get. Most are made out of light gauge aluminum and tend to bend easily. I went to my local automotive store and the tool is made of heavier gauge metal that doesn't bend.

Sent from my SM-T710 using Tapatalk


Reply
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

I haven't had issue with the one from WayTek. Of course I haven't tried to bend nails with it either. Its a hollow tube with a plastic handle. I am sure you could make something from some small tubing from a hardware store. But, heck, $5. Whats your time worth making one? I think my time is better spent working on something else.


Reply
Posts: 844
(@ags0000)
Noble Member
Joined: 16 years ago

@Wolfie (tried to PM but your box is full)

Would you mind sharing where you ultimately ended up purchasing the (I believe) 4" ball bungees you used to attach your 12mm pixel straps the bottom hoop of your megatree?

I like these clips you designed and used. I went to 3d Hubs as recommended in a post, and the quote I got for the design file for your clips was just under $10 each. Does that seem right? I don't own a 3D Printer nor have I had any items made before, so I have nothing to compare to. I'm exploring options using just the ball bungees while still minimizing twisting of the straps.

Thanks.


Reply
stallionent
Posts: 1460
(@stallionent)
Noble Member
Joined: 13 years ago

This is my set up. No clips needed

100 2155

Reply
aknflyer
Posts: 371
(@aknflyer)
Reputable Member
Joined: 10 years ago

I just tywraped the strings to my ring, and used bungies to pull the whole ring down, tensioning all strings at once with 4 bungies.

Tree Pic

Reply
Page 12 / 13
Share: