14' mega/medium tre...
 
Notifications
Clear all

14' mega/medium tree

20 Posts
8 Users
0 Reactions
11.7 K Views
MichiganLights
Posts: 479
(@michiganlights)
Prominent Member
Joined: 14 years ago

The bottom ring is that 3/4" sch40 PVC? How did you get it to form so round?


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago
MichiganLights wrote:The bottom ring is that 3/4" sch40 PVC? How did you get it to form so round?

My tree is similar. I have an 8ft base ring. It is made from three equal lengths of PVC. You would be surprised how easy it is to get a circle. I just put mine back together today and it almost forms a perfect circle on it's own, but I also have 4 supports that assist with keeping shape. I think the equal sections are the most important thing to the shape.

Here are some pics with descriptions that my help: http://www.christmasinkentucky.com/photos/megatree-photos


Reply
Posts: 838
Topic starter
(@strother85)
Prominent Member
Joined: 15 years ago
MichiganLights wrote:The bottom ring is that 3/4" sch40 PVC? How did you get it to form so round?

It is three 10' pieces. I have used the same three pieces 3 years now. They go straightish when tree is down and easily connect together to form round shape. Its the 3/4" gray electrical stuff, not the white sch40

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2


Reply
Posts: 1115
(@11bravo)
Noble Member
Joined: 14 years ago
Strother85 wrote:Alright after much planning and research I came up with my own plan for this tree that I put into place yesterday. I started by sinking a 4 foot long piece of 2" pvc in the ground with a cleanout glued on the top. This piece was cemented in for use every year. When not in use I can simply add a male thread cap for the cleanout and it will be unnoticeable during the "offseason". My above ground pole was a 10' long 2" pvc, I put a male thread on the end of this to thread into cleanout as well and also put a 10' long 1.5" pvc inside of the main pipe. This way the 1.5" pipe extends down the 4 feet in the ground and up the main pole 6 feet giving it more stability. My topper was made with a pvc toilet flange and attachments glued into this making the top and bottom of the topper female threads. This way the topper can thread onto male threads on the main pole and on the top male threads for the 4' star pvc piece can also thread in. This way the entire tree threads together and unthreads for easy storage. I used 3/32 coated wire cable for the guy wires attached to eye bolts on the topper down to 12" tie out auger anchors(the type typical of dog tie-outs). My base was simply three 10' pieces of gray 1/2" electrical underground conduit connected together into a circle. I bought 12" heavy duty tent stakes and drilled out 1/2" holes in each of them so that the conduit with slide in easily. I then just drove the tent stakes in the ground and the base was secure. I used 24, 100 count 22' lighted length green strands of lights that are doubled over. There are 24 hooks on the topper with each strand doubled over each of these hooks making for 48 "strings" of lights attached at the bottom with nothing more than dollar store zip strips. My star is made of 1/2" schedule 40 pvc cut to 48" lengths and then laid upon each other to the shape of a star. I then just drilled holes in the ends of each piece and attached the ends together with zip strips. Where the pvc pieces crossed on the star I drilled holes through both pieces and used small bolt/nut combos to hold it tight. Then white rope light was simply zip stripped on. Any questions feel free to ask. I can take more pictures also, I finished up late at night so some of the pics are dark. Let me know what ya think!

Is the diameter of this topper 12 inches?


Reply
Keebler
Posts: 1691
(@keebler)
Noble Member
Joined: 17 years ago

you have a very good design, however, i wonder about the strength of the PVC, especially in high winds under load.
my first year i used pvc and had CATACLYSMIC results when winds hit. since then i used rolled steel tubing and have had no REAL issues. i too have a concrete anchor in the ground (actually i have 2 now).

good luck and welcome to DIYC 🙂


Reply
Page 3 / 4
Share: