has this been done ...
 
Notifications
Clear all

has this been done before?

13 Posts
6 Users
0 Reactions
6,278 Views
Posts: 146
Topic starter
(@mnmike3)
Estimable Member
Joined: 17 years ago
[#17450]

I have been around the forum about 3 years now but am yet to set up anything more than some test pieces in my livingroom. I have the basics to get a display set up but every year something throws a wrench in my plan, so for next year I have decided to start planning now. I do not have much room to work with at my house but my parents live a few miles outside of town on an old farm site (lots of room) so I am considering setting the show up at their place, if they will let me.

My plan is to start "small" with one main piece then build on it over time. they Have an old windmill tower that just screams mega tree to me. I don't know how tall it is for sure but its BIG!!!!! has anybody used a windmill tower for a mega tree before? Its deffinatly sturdy and not going anywhere. I would like to do a dual layer tree where one goes up half way and the other to the top so basically a mega tree inside of a mega tree. as for the lights/channels I don't know numbers yet but am prepared for them to be high as I'd like to do 3 colors on both parts as well as some strobes (maybe not right away) and a star that I already have at the top. going to run small cables with the lights to help support the wires and have plenty of power (hopefully) coming from the shop about 20ft away where the computer will be

if anybody has used a tower like this I'd like to hear how it went. or if you have any ideas/input that would be great too.


12 Replies
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Sounds very cool! I might be able to see it from my house! 😆

It's a nifty idea... how much power do they have? I'm thinking that if your plan includes a really big shew (in my Ed Sullivan voice), you're going to need to build some electrical infrastructure, too. I guess for starters, I'd find out what's available first.

An old windmill tower would definitely make a spectacular tree!


Reply
tstraub
Posts: 525
(@tstraub)
Honorable Member
Joined: 18 years ago

Many years ago when I was a kid there was a Mega tree built on an old windmill tower way out in the middle of nowhere between my parents house and our church. We never called it a Mega tree that term probably hadn't been invented yet, but I guess that's what it was. This tree was not animated back then nothing was. It was just made of strands of multicolored lights with a huge wire frame star on top. I remember we could see it from miles away across the empty corn fields of Indiana winters. Keep us updated I would love to see one animated.


Reply
Posts: 146
Topic starter
(@mnmike3)
Estimable Member
Joined: 17 years ago

I am headed out there tomorrow to watch some football and plan on getting some measurements so I can crunch some numbers and get a better Idea what I will be dealing with should I tackle the project, I know it will be a big one, but hoping I can atleast do one part of the tree for next year if not both sections. I want to say the tower is in the 50-60ft range but then again I could be wrong, its happened before.

as for power the shop was wired with expansion in mind so I know theres extra power possibilities not being used just not sure how much yet


Reply
Posts: 146
Topic starter
(@mnmike3)
Estimable Member
Joined: 17 years ago

Looks like the tower is about 50 ft tall (didn't feel like climbing in the cold today for a measurement). so i'm thinking about running 4 renss24s and somwhere around 15,000 lights and starting with the main part of the tree. if my math is correct it should be about 60 amps at full tilt for the tree and it looks like I can run that off the existing electrical panel without issues.


Reply
Page 1 / 3
Share: