14' mega/medium tre...
 
Notifications
Clear all

14' mega/medium tree

20 Posts
8 Users
0 Reactions
11.7 K Views
Posts: 838
Topic starter
(@strother85)
Prominent Member
Joined: 15 years ago
[#17346]

Finished the project up last night. Lots of planning and thinking about the project allowed me to complete the entire project start to finish in about 10 hours yesterday. Pics to follow!


19 Replies
Posts: 838
Topic starter
(@strother85)
Prominent Member
Joined: 15 years ago

Alright after much planning and research I came up with my own plan for this tree that I put into place yesterday. I started by sinking a 4 foot long piece of 2" pvc in the ground with a cleanout glued on the top. This piece was cemented in for use every year. When not in use I can simply add a male thread cap for the cleanout and it will be unnoticeable during the "offseason". My above ground pole was a 10' long 2" pvc, I put a male thread on the end of this to thread into cleanout as well and also put a 10' long 1.5" pvc inside of the main pipe. This way the 1.5" pipe extends down the 4 feet in the ground and up the main pole 6 feet giving it more stability. My topper was made with a pvc toilet flange and attachments glued into this making the top and bottom of the topper female threads. This way the topper can thread onto male threads on the main pole and on the top male threads for the 4' star pvc piece can also thread in. This way the entire tree threads together and unthreads for easy storage. I used 3/32 coated wire cable for the guy wires attached to eye bolts on the topper down to 12" tie out auger anchors(the type typical of dog tie-outs). My base was simply three 10' pieces of gray 1/2" electrical underground conduit connected together into a circle. I bought 12" heavy duty tent stakes and drilled out 1/2" holes in each of them so that the conduit with slide in easily. I then just drove the tent stakes in the ground and the base was secure. I used 24, 100 count 22' lighted length green strands of lights that are doubled over. There are 24 hooks on the topper with each strand doubled over each of these hooks making for 48 "strings" of lights attached at the bottom with nothing more than dollar store zip strips. My star is made of 1/2" schedule 40 pvc cut to 48" lengths and then laid upon each other to the shape of a star. I then just drilled holes in the ends of each piece and attached the ends together with zip strips. Where the pvc pieces crossed on the star I drilled holes through both pieces and used small bolt/nut combos to hold it tight. Then white rope light was simply zip stripped on. Any questions feel free to ask. I can take more pictures also, I finished up late at night so some of the pics are dark. Let me know what ya think!

WP 000478
WP 000481
WP 000482
WP 000483
WP 000484

Reply
Posts: 838
Topic starter
(@strother85)
Prominent Member
Joined: 15 years ago

more pics....

WP 000486
WP 000487
WP 000488
WP 000492

Let me know what you think! Any questions feel free to ask. I'll also be posting pics, etc. of the christmas train I made this week but probably not this evening.


Reply
johnpdo
Posts: 102
(@johnpdo)
Estimable Member
Joined: 15 years ago

Pretty cool. Might steal this for next year!


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Very nicely done!!!

AND WELCOME TO DIYC!!!! Nice explanation of your build technique, too. This is the kind of information DIYC members LOVE to read, and your result was top-notch!!!

Now go have some fun with your lights!


Reply
Page 1 / 4
Share: