Notifications
Clear all

Word Clock

7 Posts
4 Users
0 Reactions
3,944 Views
Posts: 44
(@camgeer)
Trusted Member
Joined: 10 years ago

This is an awesome idea. I had never really seen these before. I have wanted to make a desk clock using nixie tubes, but this would be a great option as well. Another plan I have is to make a smart mirror in my mudroom that will use a raspberry pi to show the weather, and events from a specific calendar my wife and I share. kinda like this :

. The cool thing is I work for a company that make car mirrors, and one the interior mirrors we make is reflective until there is a screen behind it. should be able to get a panel for a build like this. shown a few seconds into this corny video...


Reply
Posts: 843
(@captainmurdoch)
Prominent Member
Joined: 14 years ago
covewi wrote:Thanks Captain

I was planning on using the same (extra) 32X16 panels I used on my matrix - which were purchased form https://www.crockettfantasyoflights.com/product/p10-matrix-panels/ .

I am assuming they use the HUB75 - from what my connectors look like. Where will I find the E address line - in the code?

If you are using those then you shouldn't have anything to worry about. They don't use the E line. You will have to remap the pins slightly in the Python code to work with the Pi Hat though since the adafruit pinout is different. If you look at https://github.com/hzeller you can look in the RPI matrix repository and there is a diagram showing the pinout that the Pi library uses. The Pi hats that we use with FPP are using that optimized pinout that is what the library calls "standard". The library also supports a "classic" pinout which wasn't as efficient and only supported one chain of panels, and it supports the adafruit pinout as well. These are compile time options for the library, so it supports one or the other but only with a recompile.


Reply
Page 2 / 2
Share: