LOR + SanDevice E68...
 
Notifications
Clear all

LOR + SanDevice E682

22 Posts
7 Users
0 Reactions
15.1 K Views
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago

What are you trying to get to work? You have a test pattern of 6 entered in the 682. When you have this set to anything but 0 all incoming data to the 682 will be ignored.


Reply
Posts: 14
Topic starter
(@jo-claes)
Eminent Member
Joined: 14 years ago
K-State Fan wrote:What are you trying to get to work? You have a test pattern of 6 entered in the 682. When you have this set to anything but 0 all incoming data to the 682 will be ignored.

Hello K-State-Fan somebody already told me to set the testpattern to 0, after that was done one off the problems was:
when I for example put the first Ledstrip completely on in LOR the first Ledstrip together with 7 sets of 3 Leds off the second strip will light up, and also the first part off the Ledstrip that is connected to port 2-1 on the E682
But thanks to Rattataz and some other people my problem is solved. I just have to change the universe and channel numbers from another 1650 DMX channels in the LOR Software and everything will be okay and running like I want it to run.
Thanks again for the help.
BTW I have another problem with a 30 channel DMX controller.
I will start a new topic for that problem


Reply
Page 3 / 3
Share: