LOR + SanDevice E68...
 
Notifications
Clear all

LOR + SanDevice E682

22 Posts
7 Users
0 Reactions
15.1 K Views
Posts: 14
Topic starter
(@jo-claes)
Eminent Member
Joined: 14 years ago

Can you help me how you have setup the network, I can't get LOR to control the lights connected to my E682
TIA
Jo

dougd wrote:I have 6 of the 682 controllers and use the LOR software. They work great together. I still use the LOR dongle for my controllers. I never did see the need to change it over to DMX.

Reply
Posts: 19
(@rattataz)
Eminent Member
Joined: 12 years ago
jo claes wrote:Can you help me how you have setup the network, I can't get LOR to control the lights connected to my E682
TIA
Jo

Can you post a screenshot of your LOR DMX preference page & your sandevice setup page. Maybe I can help.


Reply
Posts: 14
Topic starter
(@jo-claes)
Eminent Member
Joined: 14 years ago
Rattataz wrote:Can you post a screenshot of your LOR DMX preference page & your sandevice setup page. Maybe I can help.

Hello I would appreciate some help, when I for example put the first Ledstrip completely on in LOR the first Ledstrip together with 7 sets of 3 Leds off the second strip will light up, and also the first part off the Ledstrip that is connected to port 2-1 on the E682
I've posted the setup page off the sandevice and the LOR DMX preference page.
Greetings from Belgium
Jo

setup page E682
LOR DMX preferences

Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago
jo claes wrote:Hello I would appreciate some help, when I for example put the first Ledstrip completely on in LOR the first Ledstrip together with 7 sets of 3 Leds off the second strip will light up, and also the first part off the Ledstrip that is connected to port 2-1 on the E682
I've posted the setup page off the sandevice and the LOR DMX preference page.
Greetings from Belgium
Jo

Test pattern should be set to 0


Reply
Posts: 19
(@rattataz)
Eminent Member
Joined: 12 years ago

In your output configuation the color order for output 2-1 to 2-4 GRB is this on purpose? It is different than the other pixels with LPD6803 chip
Also the DMX address for output 2-1 to 2-4 is incorrect. Your end address for 1-1 to 1-4 is Universe 2 channel 90 so your start DMX address for 2-1 to 2-4 should be universe 2 channel 91


Reply
Posts: 14
Topic starter
(@jo-claes)
Eminent Member
Joined: 14 years ago
Rattataz wrote:In your output configuation the color order for output 2-1 to 2-4 GRB is this on purpose? It is different than the other pixels with LPD6803 chip
Also the DMX address for output 2-1 to 2-4 is incorrect. Your end address for 1-1 to 1-4 is Universe 2 channel 90 so your start DMX address for 2-1 to 2-4 should be universe 2 channel 91

Hello Rattataz, regarding the output configuration for the color order I had to change to GRB that's on purpose, but the I need the channels 1-1,1-2,1-3,1-4 2-1,2-2 etc.... set to universe 1-1 = univers 1
1-2 = univers 2
1-3 = univers 3
etc.....
ending with 4-4 = univers 16
or at least 3-4 is univers 12 because I want to build that 12 CCR megatree.


Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago
jo claes wrote:Hello Rattataz, regarding the output configuration for the color order I had to change to GRB that's on purpose, but the I need the channels 1-1,1-2,1-3,1-4 2-1,2-2 etc.... set to universe 1-1 = univers 1
1-2 = univers 2
1-3 = univers 3
etc.....
ending with 4-4 = univers 16
or at least 3-4 is univers 12 because I want to build that 12 CCR megatree.

Each string does not need to be a different universe.


Reply
Posts: 19
(@rattataz)
Eminent Member
Joined: 12 years ago
jo claes wrote:Hello Rattataz, regarding the output configuration for the color order I had to change to GRB that's on purpose, but the I need the channels 1-1,1-2,1-3,1-4 2-1,2-2 etc.... set to universe 1-1 = univers 1
1-2 = univers 2
1-3 = univers 3
etc.....
ending with 4-4 = univers 16
or at least 3-4 is univers 12 because I want to build that 12 CCR megatree.

Theres a couple of issue with what you want do. The 682 only supports up to 12 universes so you wouldn't be able to use 4-1 to 4-4 at all. You might not think you need it now but later you might want to add something.
You cannot set each DMX address on the 682's outputs independantly, only by cluster. You could trick the 682 by telling it that you have 680 pixels per cluster or 170 pixels per string ( even though you are only using the first 50 ) & it would then give you A starting DMX address with channel #1 at the beginning of each output but this will give you a longer refresh rate ( which is undesirable ).
You do not need to have each output start with a DMX channel #1. It may be easier in LOR to set up your strings this way but it is not necessary.
If it was me I would just start each output cluster with a new universe number & channel#1.
So what you'll get is
Output 1-1 universe 1 channel#1
Output 2-1 universe 3 channel#1
Output 3-1 universe 5 channel#1
Output 4-1 universe 7 channel#1

Then each output will be as folllows
1-1 start un#1, ch#1, end un#1, ch#150
1-2 start un#1, ch#151, end un#1, ch#300
1-3 start un#1, ch#301, end un#1, ch#450
1-4 start un#1, ch#451, end un#2, ch#90

2-1 start un#3, ch#1, end un#3, ch#150
2-2 start un#3, ch#151, end un#3, ch#300
2-3 start un#3, ch#301, end un#3, ch#450
2-4 start un#3, ch#451, end un#4, ch#90

3-1 start un#5, ch#1, end un#5, ch#150
3-2 start un#5, ch#151, end un#5, ch#300
3-3 start un#5, ch#301, end un#5, ch#450
3-4 start un#5, ch#451, end un#6, ch#90

4-1 start un#7, ch#1, end un#7, ch#150
4-2 start un#7, ch#151, end un#7, ch#300
4-3 start un#7, ch#301, end un#7, ch#450
4-4 start un#7, ch#451, end un#8, ch#90


Reply
Posts: 14
Topic starter
(@jo-claes)
Eminent Member
Joined: 14 years ago

Hello Rattataz, sorry it took so long to get back to you, but I had some other problems. I also ordered a new PC witch should arrive this weekend. That way I can install the controllers directly to this new PC.
Anyway after the weekend I will start working on the setup off the LOR Controllers + the Sandevice E682, I also ordered 3 new dmx controllers each with 30 channels together with a dmx bridge.
I want to thank you for your help and I surely going to try to set up the E682 the way you explained. I will keep you updated and will be back with more questions and problems.
Greetings from the newbie from Belgium
Joe


Reply
Posts: 14
Topic starter
(@jo-claes)
Eminent Member
Joined: 14 years ago

Okay, here are some new screenshots from my setup I can get it to work.

prtscrn LOR DMX
prtscrn sandevices

Reply
Page 2 / 3
Share: