LOR + SanDevice E68...
 
Notifications
Clear all

LOR + SanDevice E682

22 Posts
7 Users
0 Reactions
15.1 K Views
Posts: 14
Topic starter
(@jo-claes)
Eminent Member
Joined: 14 years ago
[#35789]

Hello,
I'm Jo(e) en lives in Belgium,
So please excuse me for my bad English speaking and writing, but I'll do my very best to make as less mistakes as possible.
For the last 2 years I'm using 5 LOR controllers + 2 CCR but now I would like to start working with RGB Pixels because the CCR'S from LOR are taking to much money out off my budget for the Christmas decoration.
SO I hope I can find some information in this group so I can incorporate some RGB Pixels and controllers into my LOR system.
I really want to incorporate RGB Pixels is the Sandevice E682 a good option.
All idea's and help is very welcome and will be appreciated by this newbie


21 Replies
Posts: 482
(@jcmarksafb)
Honorable Member
Joined: 15 years ago

Hello Jo. There are many good pixel controllers out there. I use the SanDevices 682's and I'm very happy with them. I started using the 682's while I still used LOR as my sequence software, and they work great with LOR S3 advanced software, so you are on the right path. You will be able to run your LOR controllers in DMX mode and then run them off of the 682 if you want. You will have to learn some things, but there is plenty of help out here and on Auschristmaslighting.com site. Hope this helps.
John


Reply
Posts: 347
(@dougd)
Reputable Member
Joined: 19 years ago

I have 6 of the 682 controllers and use the LOR software. They work great together. I still use the LOR dongle for my controllers. I never did see the need to change it over to DMX.


Reply
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago

Out of curiosity, if you have 6 E682's you must have several thousands of pixels.

What is your workflow to be able to manage that many pixels in LOR?


Reply
Posts: 347
(@dougd)
Reputable Member
Joined: 19 years ago

I had 6 682's and 2 p12's. I was just shy of 10,000 pixels this past season. I did some hardware grouping to get my channel count to 22.750. Saving sequence took a minute or so. Importing in the channel config was the most painful, about 5 minutes or so. Luckily you just do that once per sequence. I drew the visualzer using CCR's. Save every 30 minutes or so to be on the safe side. I have nothing else to compare too. I thought it did pretty well.


Reply
Posts: 825
 DanJ
(@danj)
Prominent Member
Joined: 13 years ago

I used an LOR controller with an E682 in 2013 & 2014. Worked great. I had some problems with my setup in 2014, but not related to the LOR or E682 controllers (self inflicted). The E682 is a very solid controller. You will enjoy going to pixels!


Reply
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago
dougd wrote:I had 6 682's and 2 p12's. I was just shy of 10,000 pixels this past season. I did some hardware grouping to get my channel count to 22.750. Saving sequence took a minute or so. Importing in the channel config was the most painful, about 5 minutes or so. Luckily you just do that once per sequence. I drew the visualzer using CCR's. Save every 30 minutes or so to be on the safe side. I have nothing else to compare too. I thought it did pretty well.

Did you use the Sequence editor (with 22750 channels...). Or SuperStar?


Reply
Posts: 347
(@dougd)
Reputable Member
Joined: 19 years ago

I used the sequence editor. I have the 24 ccr Super star license. That is only 1200 pixels. I did purchase a few super star sequnces for my trees.


Reply
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago
dougd wrote:I used the sequence editor. I have the 24 ccr Super star license. That is only 1200 pixels. I did purchase a few super star sequnces for my trees.

Wow. Just LOR sequence editor with 22750 channels? No Nutcracker or anything? I'm stunned. :omg:

My hat's off to you sir!

How did you create the channel to controller mapping? Surely you didn't click on thousands of rows and did them one at a time?


Reply
Posts: 347
(@dougd)
Reputable Member
Joined: 19 years ago

Vegomatic, a software addon by itsmebob0 is the easiest way to add channels to S3. Awesome program! If you had to do the LOR way you would go crazy, it would take forever.


Reply
Page 1 / 3
Share: