w john must be really busy. his sign on name shows his last date on this forum to 5/2/2010. i am waiting to hear from him too. just have to be patient. 😎
no just the pcb's to hold the leds
aw ok, ive already made my led board, its in my shed waiting to be soldered together, can i just check something before i start soldering though, do i solder all the + together and all the - together, or do i do it so the + is soldered to the -?
Stephen
aw ok, ive already made my led board, its in my shed waiting to be soldered together, can i just check something before i start soldering though, do i solder all the + together and all the - together, or do i do it so the + is soldered to the -?
Stephen[/QUOTe
are you not using the rj45 plugs on your led boards
I doubt it, ive bought a piece of hard board and drilled all the holes in it, and glued my leds in, i just dont know how to solder them, have i done it differently than everyone else?
soakes94 wrote:I doubt it, ive bought a piece of hard board and drilled all the holes in it, and glued my leds in, i just dont know how to solder them, have i done it differently than everyone else?
If you're going to do it the "old school" way, there's a post by the guy that designed the thing, Robert Jordan (aka RJ) from the old ComputerChristmas forum - http://computerchristmas.com/christmas/link-how_to/HowToId-112/Ledtriks_Led_Panel . Hope this gives you some ideas.
Nothing wrong with the way you're doing it - quite a bit more work but some folks like the bigger panels. Frank's panels (I'm about to finish up my 12th and last panel) are 1/2" centers so it makes for a bit smaller display but a bit easier to manage with multiple panel sets.
Just want to check something else about the led board, where do I put the resistors and what rating should I use?
Thanks Stephen
Stephen,
When I built my trix panel I found I referenced Kevin's site a fair amount. He has excellent photos and pulls together most of the information needed to build a Triks panel using Pegboard.
If you haven't already, point your browser at: http://www.c3inet.com/LEDTriks/index.htm
Im using the leds from best of hong kong, can someone tell me also how do I solder my leds together? Is like + to - or - to -?
Thanks Stephen
