So knowing that pixels need to go in one direction in series cable trucking would provide the following :
1. The flat part that's removable is where you drill holes and have pixels inside that.
2. Install the "U" part under the Eve's
3. Click in the flat piecce with pixels attached
Advantage : can flip the pixels to go either way without removing from the flat piece.
Problrm :. Can't find anything like this for testing in Canada
What are your thoughts on this ?
If your in a business of installing pixels, this provides a way to build up inventory prior to job starting.
Northernwarrior
Why not do it the way that HolidayCoro does it? use 1/2 PVC pipe. Drill the holes to mount Bullets and use clips to mount to Line. you can make your own clips or buy from them. YouTube
. No need to reinvent the wheel.
Because PVC doesn't look nice if using as a permanent solution.
stallionent wrote:I used the cable ducts
https://www.electriduct.com/Electriduct-Solid-Wall-Wire-Duct.html
That is exactly what I'm looking for. Do you have any more pics ?
So do you install it the way I mentioned in original post ? Wonder how much shipping is to Canada.
Can you give me your thoughts on using this vs. jchannel ? My house is using J channel. Well hidden as my pixels face my house for a wash effect.
I just think using a full enclosed solution would look that much nicer
12 pcs 6-1/2 ft long at $144, + shipping. EXPENSIVE, but.. I like the looks over PVC pipes or J-channel. I leave my lights up all year, I ask people who come to my house.."did you see my Christmas lights on the house" Not one saw them..till I pointed them out.
I doubled up the braces, one on the inside and one on the back.
Your attachment is invalid.
Why didn't you drill the holes on the flat piece that clips in to make it a "box" ? And just screw the "u" part to the house ? Maybe I'm viewing this incorrectly, but once the duct is complete is it smooth on all sides ( assuming no drilling yet ?





