Hey all,
After doing a fair amount of research, found this forum and the awesome wiki! I've decided, I'm not really up for a major investment (Time or Money) at this stage yet.
I don't want to grinch of the block though, so I was hoping to throw up a few strands and do something simple.
My thoughts:
- Purchase Intelligent pixels now, so that I can use them in the future.(They seem to be close in price to dumb pixels)
- I'm leaning towards the new technicolor C9's due mostly to shape (and cost?)
- Buy a cheap simple controller, something like a dumb controller
I'm struggling on that last point, is there something that is simple for intelligent pixels? Or is that an oxymoron and I can't have it both ways.
What about my pixel choice? I'm also interested in the other things I'll need, but need to at least figure out the basics and if something like this is feasible.
Thanks in advance
Welcome to DIYC. Buying pixels is the way to go. I would go 12v strips for your first jump in. A down and dirty controller is here http://www.aliexpress.com/item/TH2010-series-LED-pixel-remote-controller-support-WS2811-LED-pixel-lights-Max-5A-output/573403895.html This does some nice efx and is pleasing to watch. I doubt at this late date you will be able to do a sequence yourself as there is a learning curve to deal with. You will need at least 1 12v power supply, I would suggest a 12v 350W min. You can find them on the store above or on Amazon for around $20. Holiday Coro also sells this stuff here in the states and are very helpful. Here is a good starting point http://auschristmaslighting.com/wiki/AusChristmasLighting_101 Hope this helps.
John
I agree that you should go pixels. They may be more complicated than dumb RGB LEDs, but you will have more options in the future. For the controller, you should invest in a quality, low channel count controller instead of a cheap controller that you'll throw away next year. For example, get an E6804. This is because the controller is smaller and costs less, but you can still use it in your system by adding more controllers in future years. A couple strings of 12v, 50 LED strings using WS2811 chips (these or these)will be a decent starting setup if you planning on adding on more in the future. Don't forget the 12v power supply and a enclosureto keep your electronics clean and dry.
