For all the folks using PVC for mounting lights to how are u keeping them all facing the same direction? I started putting lights on the pipe and having a tuff time keeping the lights all facing one way. Any pointers would be nice. 
Sent from my iPhone using Tapatalk
I have seen two solutions: (I'm sure there are more)
1. drill the pvc and push the light into the holes
2. use one of the mounting tapes that is also used for mega trees.
Been thinking about it a little bit more and I think I’m gonna try hot glue on the bulbs that won’t “lay down”. I used hot glue last year to glue the lights to the brick then I saw this PVC idea and thought this would be much better
Sent from my iPhone using Tapatalk
I'm doing the same thing as you because I don't care for the ordered look of evenly spaced lights. My mini/8' tree uses Boscoyo Strips but I want everything else to look like traditional stringed lights. I'm also draping lights from the PVC, wrapped around garland. Without drilling or using a strip you might get what you want by putting zip ties close to each side of every light and cinching them down tight. Otherwise just go with what you have. You may like it.
You could also use a table saw to cut out a channel that would hold the sockets. You also use vinyl siding j channel...
