Not Christmas related but you guys have to have the answer. I have a bar that I installed the typical chasing LEDs you find on ebay on the ceiling down both sides. I use the same 133 mode controller everyone sells. The power supply and the controller have burnt out more times than I can count. I am looking for a better solution. I have approx. 32 feet of LEDs off each side of the controller so the LEDs start chasing from the center down the left and right sides at the same time. Kind of like runway lights. I need a better controller as I have had no luck with what seems to be available. I've seen a lot of chasing controllers but they seem to just control a single strip of lights and not from the center out.
Any ideas ?
Thanks!!
Is the controller what is burning out or the power supply? If it's the power supply it sounds like it is under powered for the lights and is being over driven. What is the voltage and wattage of the power supply you are using. Might want to consider getting the same voltage but more wattage.
Both controller and power supply burn out. The standard type supplies kept burning out so I went with one of these and everything past the supply fried after working for a month or so. https://www.amazon.com/gp/product/B01IMOS20A/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
