Hi guys,
I recently received my order of 5 strings of 50 lights. I'm going to be using them to line my roof line, as well as creating leaping arches.
For the lining of the roof, I have a section where I need to go about 10 feet with no bulbs to transition to another roof line. I know I could just leave those bulbs out of the sequencing and they would stay dark... but to not waste any pixels, is there any reason i couldn't splice in 10 feet of extra wire between 2 of the pixels? I'll be using an E681 to control them. Just wondering if there are any limits to the spacing between pixels?
AFAIK the GE lights are not that picky about that as other pixels so you should be OK splicing the 3 wires between the breaks.
I've been doing a lot of work with the GE lights. There are two issues to deal with, and they are opposing one another:
Depending on where in your strand you want the break, there will be as much as 2.5A (at the beginning of the strand, all nodes on, white) decreasing towards the end. While the lights are tolerant of voltage, using 18AWG wire with 6.385 mOhm/foot that's 320mV additional drop @2.5A; using 24AWG (cat5 cable) will drop more than 1.25V. If you're extending the strand near the end (furthest from the supply side) then the heavy gauge power conductors are not as important. There is already appreciable voltage drop in the OEM configuration between the first and last node, this will just add to that. You'll likely see flicker on the nodes after your splice if voltage drop has become an issue.
On the other hand, the data line has very low current (low IR drop) and prefers low capacitance. There, the 24AWG (cat5 cable) would be fine. So, you may want to make your own custom extension with small gauge data and heavier gauge power conductors.
ags0000 wrote:So, you may want to make your own custom extension with small gauge data and heavier gauge power conductors.
Or use multi conductor RJ12 or cat5 and double or triple up on the power but only use a single conductor for the signal.
Joel
Im gonna try 18/3 first, because thats what I have on hand. 🙂
It's between pixels 19 and 20 of a 50 light string. I will report back...
everything working great!
Next weekend I cut off the stock controllers, and add the leads to the E681. Not sure how that will affect things... but we'll see. I need to figure out what power supply I'll need for the 681 to drive 5 50-light strings of these? Can anyone help me with that? Obviously 5 volts... but how many amps?
g8rfn wrote:everything working great!Next weekend I cut off the stock controllers, and add the leads to the E681. Not sure how that will affect things... but we'll see. I need to figure out what power supply I'll need for the 681 to drive 5 50-light strings of these? Can anyone help me with that? Obviously 5 volts... but how many amps?
I think the 50-light string power supply is rated at 3A - so - I guess you'd be looking at about 15A - a good PC supply would probably get you there.
Where did you buy your lights? I haven't been able to find them here in Canada.
jcdammeyer wrote:Where did you buy your lights? I haven't been able to find them here in Canada.
My guess? The place he posted about a few days ago:
http://doityourselfchristmas.com/forums/showthread.php?17341-Meijer-GE-LED-Color-Effects-Sale
I got mine from Costco here in the US. I've seen many retailers with them, but at unbelievably high prices. Sears has 25-count for $100! They then run sales often for 20% off. $80 is still too much for 25-count string. The Costco price here is $64.99 for a set of 50.
Costco is carrying them up here this year. I purchased 2 set ... 69.99 each.
I have returned one (box had been opened, no remote included, one bulb was "yellow" versus white)
