Matt_Edwards wrote:I have some more coming in too. As far as I can see the biggest issue is the creation of 90- 120 Vac at low current. Control is very easy too, but I don't think dimming will be possible
cant you do dimming with this application in a sort of PWM (Pulse Width Modulation)control... i am not sure never tried
I read somewhere that EL lighting -being based on phosphor - will break down with UV light and dramatically reduces its lifetime when left out for a couple of weeks (like we do!).
Considered doing it - and have been told that they are "tricky" to terminate as they have very fine wires.
That said - I have never done it.. but the inverters and wireing are pretty easy to get hold of..
Hope thats some food for thoight.
Mike
aususer wrote:I read somewhere that EL lighting -being based on phosphor - will break down with UV light and dramatically reduces its lifetime when left out for a couple of weeks (like we do!).
Considered doing it - and have been told that they are "tricky" to terminate as they have very fine wires.
That said - I have never done it.. but the inverters and wireing are pretty easy to get hold of..
Hope thats some food for thoight.
Mike
that being said yes you can dim them with a PWM but the dim curve wont be smooth and shut off at a certain level before completely off....much like a florescent
griffixdc wrote:that being said yes you can dim them with a PWM but the dim curve wont be smooth and shut off at a certain level before completely off....much like a florescent
No - EL wire cannot be dimmed using PWM - you can change brightness via changing the frequency of it's AC power supply which is fairly high in voltage as well.
Cheaper ways to dim EL wire:
1. Close your eyes a bit.
2. Wear dark glasses.
