Cheap LED Strings
 
Notifications
Clear all

Cheap LED Strings

76 Posts
18 Users
0 Reactions
38.9 K Views
dirknerkle
Posts: 10309
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I stopped by my local Target store on the way home to pick up a few used one-time cameras... and the verdict is in... the cap makes a BIG difference in the brightness. So thanks to IDUN for the tip!

Without any scientific measurement, I'd say that without the cap they're at about 75% while with the cap they're at 100%.

BTW... I found out today that Target stores nationwide are looking at eliminating the processing of one-time use film on-site in the very near future. Instead, they will send them out which means the used bodies may start getting very scarce at the local stores. I don't know how this will affect drug stores and other places that might process film on-site but it's certainly a trend. So if you want to pick up any of these used things for future use, it might be a pretty good idea to start gathering them now.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

So... Where exactly does the cap fit in the circuit?

dirknerkle wrote:I stopped by my local Target store on the way home to pick up a few used one-time cameras... and the verdict is in... the cap makes a BIG difference in the brightness. So thanks to IDUN for the tip!

Without any scientific measurement, I'd say that without the cap they're at about 75% while with the cap they're at 100%.

BTW... I found out today that Target stores nationwide are looking at eliminating the processing of one-time use film on-site in the very near future. Instead, they will send them out which means the used bodies may start getting very scarce at the local stores. I don't know how this will affect drug stores and other places that might process film on-site but it's certainly a trend. So if you want to pick up any of these used things for future use, it might be a pretty good idea to start gathering them now.


Reply
dirknerkle
Posts: 10309
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
ukewarrior wrote:So... Where exactly does the cap fit in the circuit?

On the output side -- where the lights connect. Observe the proper polarity since it's an electrolytic cap.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Gotcha.
I've also seen caps put across the + and - as filters. You are saying it goes inline with the + DC voltage.

dirknerkle wrote:On the output side -- where the lights connect. Observe the proper polarity since it's an electrolytic cap.

Reply
dirknerkle
Posts: 10309
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Across the outputs. + to +, - to -.


Reply
Page 9 / 16
Share: