Okay, you all convinced me. So I tried yet another experiment with one of these cheap strings of lights...
I took one strand of these cheap leds (there are four strands of 25 lights each that terminate at an end connection with a 5th wire that is common), and I designed a little board I call the "led bridge." It's just a full-wave bridge rectifier using four 1N4004 diodes. The board is pretty tiny (1/2" x 1.5") so I etched a bunch of them together and cut them apart with a sharp, quick slam with a paper cutter.
I soldered a plug onto the AC end and the kathode side of one end of the string to the negative terminal and the anode end of the string to the positive terminal. For safety I used a plug from an old string that includes fuses, and I covered the led bridge with shrink tube. Notice how the wires feed through holes on each end for strength.
It works. It was yet another learning experience for me in my sojourn of using LEDs.
That looks great Dave, now when people ask how to cut these up we can point them here.
I don't understand how the full-wave bridge rectifier works but that's ok, I don't have to right now.
Jrd wrote:That looks great Dave, now when people ask how to cut these up we can point them here.I don't understand how the full-wave bridge rectifier works but that's ok, I don't have to right now.
Just do a google search for "bridge rectifier" and you'll get all kinds of info about it. It's a very simple circuit that essentially uses both halves of the A/C wave. Only trick is using diodes with enough headroom for 120VAC (or 230VAC). The 1N4004 is rated up to about 400 voltes and 240 volts RMS, so it's adequate for 120VAC. I bought a package of 1000 of them on eBay for about $10 so at a penny each, these little led_bridge gizmos will be pretty cheap to make...
Here is what I do
I used those kind of lights last year on my mini trees
I cut the 8 function controller of and soldered all the + wires with + and all the - with -
(I have written this before 😛 )
and then I connected the 2 wires I now have to a rectifier 😉
Here is a picture
So.....
you are driving 25 white LEDs off 120v AC directly with this.
I understand that the diodes convert the current to DC.
What about the amount of voltage you are presenting to the LEDs? ARe you overdriving the LEDs?
dirknerkle wrote:Okay, you all convinced me. So I tried yet another experiment with one of these cheap strings of lights...I took one strand of these cheap leds (there are four strands of 25 lights each that terminate at an end connection with a 5th wire that is common), and I designed a little board I call the "led bridge." It's just a full-wave bridge rectifier using four 1N4004 diodes. The board is pretty tiny (1/2" x 1.5") so I etched a bunch of them together and cut them apart with a sharp, quick slam with a paper cutter.
I soldered a plug onto the AC end and the kathode side of one end of the string to the negative terminal and the anode end of the string to the positive terminal. For safety I used a plug from an old string that includes fuses, and I covered the led bridge with shrink tube. Notice how the wires feed through holes on each end for strength.
It works. It was yet another learning experience for me in my sojourn of using LEDs.
