Cheap LED Strings
 
Notifications
Clear all

Cheap LED Strings

76 Posts
18 Users
0 Reactions
38.8 K Views
Posts: 11
(@stevexmas)
Active Member
Joined: 16 years ago

hi dirknerkle,
Thanks again for your reply. Just to confirm, I have the same controller and layout as in your picture, it's just that it only has three of the PCR406 things on it instead of four (one slot is empty) - other than that it is identical. So for some reason, they decided to make this one with three 33 led strings instead of four 25 led strings.
In any event, I'll play around with it and see what happens. I'm posting here not only for myself, but in case anyone else is searching for how to modify these lights. This thread you started is full of great info! 🙂


Reply
dirknerkle
Posts: 10309
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

SteveXmas: It would help if you put your location in your signature so we can all look for smoke in that direction. 😈

Ernie: I like your style! 😎


Reply
Posts: 11
(@stevexmas)
Active Member
Joined: 16 years ago

I popped the wires off of the controller and got the lights to work (I used a power strip with an on-off switch and a fuse to test it). The problem is the individual wires are incredibly cheap, and smaller than the smallest gauge on my wire stripper. So I tried stripping them to the bare wire (which is microscopic) using my thumbnail. Anyway, the string works, but I don't like the wire ends and unless I can figure out a better way to strip these wires so I can connect them to a plug, I'll probably trash the string...
PS. I'm in California, but no smoke yet...


Reply
dirknerkle
Posts: 10309
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Yeah, those wires are incredibly limp and delicate. I've had good luck using shrink tube in connecting them to SPT wire/plugs. Sometimes you have to use two parts of the tubing to bulk it up enough for strength at the joint, but it works pretty well.

BTW... nice going on getting them to work. Ernie will be disappointed that you didn't get any smoke.... 😆


Reply
Posts: 132
(@dragon88)
Estimable Member
Joined: 17 years ago

I have some of them, but do not know how many watts per string. Anyone?


Reply
Page 11 / 16
Share: