I'm a first timer with 2 grinches. When I run them seperatly they work fine. When I go to plug they cat5 in to the first grinch output the channels go hay-wire, they do what they want even if its just the cable no grinch on the other end. Its a good cat5 store bought and tested. Thought it might be the first grinch so I switched them had the same problem.Went to change the bios to epp and I dont have epp tried the ones I had still no luck. Thought it might be power supply checked that and even took the jumpers off and powered each on there own still no good.Does anyone have any sugestions?
Do you have the plug-in set for 128 channels when you plug in the second?
Blhudk1 wrote:I'm a first timer with 2 grinches. When I run them seperatly they work fine. When I go to plug they cat5 in to the first grinch output the channels go hay-wire, they do what they want even if its just the cable no grinch on the other end. Its a good cat5 store bought and tested. Thought it might be the first grinch so I switched them had the same problem.Went to change the bios to epp and I dont have epp tried the ones I had still no luck. Thought it might be power supply checked that and even took the jumpers off and powered each on there own still no good.Does anyone have any sugestions?
Are you SURE you have a good PATCH cable between the two GRINCH's ?
Try another cable ( bet the one you have is NOT a PATCH , but a crossover /network cable
I have the pluggins set on 1 to 128 for the simple 595 on port 1
whats the wire diagram for a patch I have wo-o-wg-b-wb-g-wb-b that i use same for the ssr's
thanks terbobob i will try
TERBObob wrote:Are you SURE you have a good PATCH cable between the two GRINCH's ?
Try another cable ( bet the one you have is NOT a PATCH , but a crossover /network cable
Sounds like he has a crossover cable in there somewhere. I got a great deal on some cables, found out why. Crossovers. From the Grinch to SSR. They worked, just plug stuff into different chanell at the SSR. On th PCI DIO cards that I am driving ULN chips they will not work.
went out to check had 2 store bought cat5 made 2 of my own and replaced them still no luck.The channels seem to light one or two channels off from where they are sequenced.I didnt change any channel order in my sequencing but maybe there is something I missed.I also dont use all the outputs on the first grinch there are three open spots do I have to program those channels before using channels from the second grinch.
Blhudk1 wrote:I also dont use all the outputs on the first grinch there are three open spots do I have to program those channels before using channels from the second grinch.
Yes! The first Grinch doesn't know that you aren't using all 64 channels so you have to send it 64 even if there are 3 empty channels. Before the 2nd Grinch can get any data the first Grinch must get its 64 channels first.
If you don't want to use those channels on the first Grinch just leave them blank but they must be accounted for.


