Grinch cable length...
 
Notifications
Clear all

Grinch cable lengths

4 Posts
4 Users
0 Reactions
2,323 Views
Posts: 283
Topic starter
(@eswets)
Reputable Member
Joined: 18 years ago
[#4944]

Just ordered my my parts for the Grinch controller and boards are on there way. Starting with one Grinch and 64 channels, plan is 128 channels that dim! I am starting to get all my wiring done and need to know the max distance from computer to Grinch, and Grinch to SSR's. I am figured about 35ft from comp. to grinch and anywhere from 75-125ft from Grinch to SSR's. Is this going to be OK?
Thanks
Eric


3 Replies
RJ
Posts: 673
 RJ
(@rj)
Prominent Member
Joined: 19 years ago
eswets wrote:Just ordered my my parts for the Grinch controller and boards are on there way. Starting with one Grinch and 64 channels, plan is 128 channels that dim! I am starting to get all my wiring done and need to know the max distance from computer to Grinch, and Grinch to SSR's. I am figured about 35ft from comp. to grinch and anywhere from 75-125ft from Grinch to SSR's. Is this going to be OK?
Thanks
Eric

The 75 - ft to the SSR's is most like fine. The computer to Grinch is another story. It may work fine at this distance and you may have problems. It all depends on your Computer port. Some people on some computers can not get them to work at 2 ft so you won't know till you try it. I was Able to run those kinds of dist. without any issues on my system. This is one of the Grinch's and other printer port controllers kryptonite. The ports are going away and the issues of different ones behaving totally different.

RJ


Reply
Posts: 172
(@animal)
Estimable Member
Joined: 19 years ago

If your going to dim with the ren t with serial port out. Use it as case 3. Let the ren t convert your rs232 to rs485. Then you should not have any problems. The zero crossing shouldn't be an issue either. I run to my ren t right at my computer then about 50' to my first ren c and grinch then out of the ren c to the second ren c and grinch another 40' away. As of right now I am not haveing any issues with both. But I'm not finished yet.
Oh boy!

http://doityourselfchristmas.com/wiki/index.php?title=Ren-T_Assembly_Instructions#CASE_3:

animal


Reply
Posts: 16
(@draksig)
Eminent Member
Joined: 18 years ago

I understand the grinch needing to be near the computer. What about from grinch to grinch? Does the last grinch on the chain still need to be that close to the PC?


Reply
Share: