Grinch Power supply
 
Notifications
Clear all

Grinch Power supply

9 Posts
7 Users
0 Reactions
4,907 Views
Aurbo99
Posts: 2804
Moderator
Topic starter
(@aurbo99)
Member
Joined: 19 years ago
[#4816]

I've been catching up on old threads now that I'm back in front of a fast connection.

I noticed that several posts have been about the Grinch PSU.

Has anyone created an "Option 2" as per the Grinch Wiki and brough power in off the computer power supply via the adapter from DB25 to RJ45 ?

add Pin 1 as +5VDC with J1 installed on the Grinch.

http://www.doityourselfchristmas.com/wiki/index.php?title=Renard_16_Controller Shows how its done for the Ren16.

Is there any reason it cant be done with the Grinch and remove this often troubling spot for newbies?


8 Replies
Aurbo99
Posts: 2804
Moderator
Topic starter
(@aurbo99)
Member
Joined: 19 years ago

MAN!! I wish I had of seen this over a year ago..

It would have solved a TON of my "Grinch Gremlins" I first had.

Posting it here.. maybe it will help someone else.

Look at the channel assignments! I had all my "north side" or upper board channels crossed. 9-12 I had labelled as 13-16 and so on, all the way across.


Reply
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago
Aurbo99 wrote:MAN!! I wish I had of seen this over a year ago..

It would have solved a TON of my "Grinch Gremlins" I first had.

Yes, I was having a devil of a time figuring out why Channel 48 wasn't going blinky-flashy -- I sat here for over an hour with the tester slider, running back and forth to the Grinch, plugging and unplugging.

I finally found this diagram and the problem was solved.

\dmc


Reply
daviddth
Posts: 925
(@daviddth)
Prominent Member
Joined: 19 years ago
Aurbo99 wrote:
Is there any reason it cant be done with the Grinch and remove this often troubling spot for newbies?

I used it in testing, but soon realised that I was dragging over an amp on the grinch with all 64 outputs on, the LED's on the ssroz boards all installed etc. Thats a little too high for me to feel comfortable dragging through the connections on an RJ45 & Cat 5 cable


Reply
jpettit
Posts: 62
(@jpettit)
Trusted Member
Joined: 19 years ago

Anybody ever try a USB cable for power?


Reply
wjohn
Posts: 1102
(@wjohn)
Noble Member
Joined: 19 years ago

the spec for USB is even lower (less than 500 mA) and the GRINCH could require 800-1000mA


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

I thought that the current should be around 544 mA if everything is on (384 mA for the SSR optos, 160 mA for the SSR power LEDs). That is still too much for the USB port, though...


Reply
NogginBoink
Posts: 482
(@nogginboink)
Honorable Member
Joined: 19 years ago
wjohn wrote:the spec for USB is even lower (less than 500 mA) and the GRINCH could require 800-1000mA

Actually, you're only supposed to draw max 100mA from the USB bus, then you have to ask permission to draw more current than that. If the upstream hub can supply more current, the USB controller will give your device the okay to draw more current, at which time you can turn on your higher-current parts.


Reply
NogginBoink
Posts: 482
(@nogginboink)
Honorable Member
Joined: 19 years ago

I am drawing power for my two Grinch boards from a spare hard drive connector in my computer. I have two cables from the computer to the Grinch: one data, one power, although it's just as valid do splice the cable on the computer end.


Reply
Share: