Do you have a PIC programmer? That is pretty much required to take part in any Beta program.
You are also going to need some way of generating the zero-crossing that is not included on the converter itself (something like the transformer board that Wayne is working on).
--
Phil
jmelvin,
Where are you located?
--
Phil
P. Short wrote:Do you have a PIC programmer?
No but I'm sure I can acquire one.
You are also going to need some way of generating the zero-crossing that is not included on the converter itself (something like the transformer board that Wayne is working on.)
Point me in the right direction and I'm there.
Where are you located?
Central Florida
jmelvin wrote:Point me in the right direction and I'm there.
This is the board Phil is speaking of. RS232 input and zero cross.
http://www.doityourselfchristmas.com/forum/viewtopic.php?t=177
With the REN-C one board controls one Grinch/595 for 64 channels. Is it possible to for one REN-C to control all the boards (384 channels)?
The Ren-C is designed to control exactly 64 channels, no more and no less.
That said, there is a higher-performance PIC with more memory that is pin-compatible with the PIC used in Ren-C (although I'm not sure that they have the CCP module that is necessary). This would allow the number of channels to be increased (to 128), but would require re-coding the firmware.
If you want to control more than 64 channels, I would recommend using more than one Ren-C. Also, if you are new to computer-controlled animation of the Christmas displays, I would recommend that you limit yourself to 64 channels for the first year.
--
Phil
