Dimming?
 
Notifications
Clear all

Dimming?

16 Posts
4 Users
0 Reactions
10.7 K Views
Posts: 110
Topic starter
(@jmelvin)
Estimable Member
Joined: 19 years ago
[#220]

Is it possible with the grinch board?


15 Replies
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

Not by itself. The Renard-595 converter board should work just well with a 64-channel Grinch as with the 64-channel coop board.

--

Phil


Reply
Posts: 110
Topic starter
(@jmelvin)
Estimable Member
Joined: 19 years ago

I figured there would have to be some kind of interface between the grinch and ssr or pc and grinch. Would i still be able to use Vixen to control everything?


Reply
wjohn
Posts: 1102
(@wjohn)
Noble Member
Joined: 20 years ago

Hi,

We are working on a RENARD Conversion Board. It will allow 595 and GRINCHs to dimm over 192 levels.

Have a look at the Wiki,

http://doityourselfchristmas.com/wiki/index.php?title=Renard-595_Converter

The REN C would be between the PC and the 595/GRINCH.

John.


Reply
Posts: 110
Topic starter
(@jmelvin)
Estimable Member
Joined: 19 years ago
wjohn wrote:Hi,

We are working on a RENARD Conversion Board. It will allow 595 and GRINCHs to dim over 192 levels.

Have a look at the Wiki,

http://doityourselfchristmas.com/wiki/index.php?title=Renard-595_Converter

The REN C would be between the PC and the 595/GRINCH.

John.

Has this been tested yet with vixen. The board itself looks pretty simple.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

No. It is under development now. When it works, though, it will work under vixen.

Additionally, I haven't checked the setup and hold times on the chips on the grinch board, so my statement that it should work is just a first impression.

--

Phil


Reply
Posts: 110
Topic starter
(@jmelvin)
Estimable Member
Joined: 19 years ago

Is there a thread started yet for the REN-c. Can u give me a parts list to make one and do some testing?


Reply
wjohn
Posts: 1102
(@wjohn)
Noble Member
Joined: 20 years ago

Have a look at the Wiki.

http://doityourselfchristmas.com/wiki/index.php?title=Renard-595_Converter

There is an early version of the schematic, however I would suggest holding off till the final beta version is ready, if you can.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 20 years ago

Just to make things explicit...

1) This design is under development as we write. It will be several weeks to a month (best case) before it could possible be ready to start a coop order. Neither the PCB nor the firmware is done at the moment, and so nobody (other than myself) has done any testing.

2) If you wish to be involved in early (Beta) testing, you should make that known. As far as I know nobody has discussed Beta testing yet, so the dates and other circumstances of the test are not known yet.

3) Christmas is only six months (less one day) away. All of these things take time. Especially if this is your first time.

--

Phil


Reply
Posts: 110
Topic starter
(@jmelvin)
Estimable Member
Joined: 19 years ago

I would absolutely want to help beta test. I have 5 grinch boards and 1 595 all 384 channels up and running ready for christmas. It's driving my wife crazy, she had me get approval from the neighbors around me before I got started. I keep telling her wait till u see it. I even got the neighbor across the street hooked. we're going to try a network setup to sequence both houses.


Reply
Page 1 / 2
Share: