Set Level is my choice for controlled on-off action at different intervals.
Pulse would also work, but that is to bring light level up from a (0% to 100%) range to a (100% to 0%) range. Up, down, or both. Basically fade in and/or fade out. Not sure your Arduino has dimming capabilities
Alternating is typically like a train crossing. Two sets of lights alternating on and off. One set of lights would be an constant on-off is the time cycle you choose.
Hope this simplifies the effects for you
I've tried the Set Level, but it seems that the occasional event will be skipped, and some cut short, turn on later then they should, and shut off early. I've been toying with the alternating effect and it seems to be working like a charm.
Thank you so much everyone!
Cheers, Cheri
TheLloyds wrote:I've tried the Set Level, but it seems that the occasional event will be skipped, and some cut short, turn on later then they should, and shut off early. I've been toying with the alternating effect and it seems to be working like a charm.Thank you so much everyone!
Cheers, Cheri
Cheri, even in Canada, Vixen should work the same as US....so if Alternating is working but Set Level is not, then I suspect there is a setup or sequencing problem. They both should work for you....Pulse could give problems if the % of light is a conflict between Vixen and Arduino.
If you have it working the way you want it, maybe we shouldn't fix it. If you need addition assistance or clarification, feel free to ask.
One more thought....I has some Halloween Orange string lights that didn't respond correctly to my sequence. Way off. Missing beats, skipping 1/2-1 second sometimes. When I changed the lights with my test strings, everything was fine. The Halloween Orange light just could not respond to the quickness of the sequence.
I agree, don't fix what's not broken, and so far.......so good (alternating effect).
