LSP2 is Released!
 
Notifications
Clear all

LSP2 is Released!

82 Posts
21 Users
0 Reactions
34.5 K Views
Posts: 496
(@wombat)
Honorable Member
Joined: 19 years ago

I am deleting my original post. I respect David for finally providing me with what we were entitled to.

Yes there was some stuff said which I feel passionate about. Enough to risk being banned from LSP which I have been 🙁

I have now been given my money back and a free version of LightShowPro Professional Edition by David.

I have however Refunded this money back to LSP as I believe that all that I was entitled to was a Free version of Professional Version of Light Show Pro V2 edition and he is running a business.

Thank you to those who backed me in this cause.

I still think that Light Show Pro is an Excellent product and wish him all the best in the future with it.

Regards
Wombat

Sent to:
David Johnson
Email:
sales@lightshowpro.com

Total amount:
-$99.00 USD
Fee amount:
$3.67 USD
Net amount:
-$95.33 USD

Date:
18 Aug 2011
Time:
07:57:43 AEST
Status:
Completed

Subject:

You have sent $95.33 USD to David Johnson with PayPal
Note:

Hi David, Thank you for the refund However I cannot accept. I believe that you have a Business to run and feel that the free upgrade to Pro Edition all that I was entitled to. I hope that we can still do business in the future and wish you well. Thank you


Reply
Posts: 11
(@typoagain)
Active Member
Joined: 16 years ago

I was able to get some hands on time with a beta tester a couple of weeks ago. i think that you will find that LSP2 is a much better piece fo software.

I also heard they had a problem with upgrades due to a server error when v.2 came out. They had the problem fixed within a few hours.

Personally I was blown away with the new version. I have had several friends who are using it and none of us has had any major problems so far. The learning curve is a bit steep, but that is to be expected with software that does so much.

Don't judge it too quickly. I think that you will be very happy in the long run.


Reply
Posts: 290
(@fasteddy)
Reputable Member
Joined: 17 years ago

I must say that i did a demo on LSP a couple of weeks ago on a old centrino laptop with thousands of channels at the Brisbane mini, LSP performed great even on the basic hardware with thousands of channels. I believe it is a performer now but i do know there are many that already have a bad taste in their mouths from their 1.8 experience and will be very critical of anything they find no matter how small and that can be understandable.
With many of the members here being vixen users i can also understand the high expectations put apon LSP as it is not a free sequencing program like vixen, but currently as vixen stands it really cant do what i want and is not a great program for managing many thousands of RGB channels, Vixen 3 shows a lot of promise but i wonder how ready it will be for this season. Another option is madrix but that will cost 8 x the price of LSP for the same number of channels. There is aslo LOR S3 but thats still not released so its hard to make any comparison to LSP v2. There are other software packages but again they are lacking in comparison to LSP fetaures.
I know im very happy with LSP v2 and know that this year i can be very creative and ill enjoy sequencing with the great tools that LSP v2 provides.

And wombat we have heard your rant for the last 2 days. If you feel your being ripped off then dont buy it and dont use it, no one is forcing you. Its been clearly explained to you on many occassions by me and others.
Anyway its your fault for being too ambitious and needing more than 16 universes, LOL 😉


Reply
Posts: 496
(@wombat)
Honorable Member
Joined: 19 years ago

You may have heard it but this was the first time that I have mentioned it on here.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

:mrgreen:

Fasteddy's point is well taken, using LSP (or buying it in the first place) is a choice. Sometimes we make good choices, sometimes not so good. But the pricing/upgrade/whatever issue is always a difficult one for consumers to stomach when it changes, but it is most certainly in the manufacturer's domain to determine his pricing. We, as consumers, can in turn decide if we like the pricing or not by supporting the product or purchasing something else. Ultimately the consumer has the power because if nobody buys it at one price, the manufacturer is either forced to (a) change the pricing model, (b) cease manufacturing the product or (c) go out of business.

It's like watching TV: if you don't like the show on one channel, change to something else. If you don't like any of the channels, turn it off. In my case, I'm not going to watch the LSP channel anymore... 😆


Reply
n8huntsman
Posts: 562
(@n8huntsman)
Honorable Member
Joined: 16 years ago

I know there is a steep learning curve. It's frustrating, I know. I was ready to through my computer across the room when I tried 1.8. But I really emplore everyone to spend some time with it. Force yourself to watch all the tutorials, for this version and the previous. Make sure your audio is encoded with 128 kbs and 44100 hz. Audacity is a good free program to do this. Then struggle through creating at least one sequence. I'm sure you will all quickly find that it's not as bad as first impression may lead you to believe. I've completed my second sequence and I'm getting better and faster. I'm not saying it's perfect, but I am learning work arounds for it. You shouldn't have to do this, yes, but I believe the features outweigh the problems.


Reply
Posts: 2171
(@mschell)
Noble Member
Joined: 18 years ago

I'm not here to continue the sequencer wars, but did want to make one point. One of the more mentioned complaints is around importing Vixen sequences. While that's understandable that many folks here want to move their Vixen sequences to LSP without issues, understand that translation from one program to another is not an easy task. There's no guarantee that the Vixen sequence is in a known "good" state, and with the varied versions (2.1, 2.5, etc.), it's quite possible that some of the issue could be due to the actual sequence.

And perhaps, this translation/import issue has been less tested than some of the major features, such as layers and RGB. I know that the import of AL sequences was never as great as I would like, since I had a fair number of those sequences in my collection. I chose to "redo" those sequences and channel layouts from scratch, or at least keeping the timing with the music. I can still use my AL controllers with LSP and have for the last 3 years.

One other note - the 16 universe limit of the advanced version is not based totally on Universe count, but is a 8192 channel limit, I believe. You can have lots more than 16 universes with 8192 channels if you are not using the full 512 channels of a universe. I've segmented my display and sometime use much less than 512 on a given segment. Of course, that is changing this year with lots more RGB.


Reply
macebobo
Posts: 1595
Guest
(@macebobo)
Member
Joined: 17 years ago
mschell wrote:I'm not here to continue the sequencer wars, but did want to make one point. One of the more mentioned complaints is around importing Vixen sequences. While that's understandable that many folks here want to move their Vixen sequences to LSP without issues, understand that translation from one program to another is not an easy task. There's no guarantee that the Vixen sequence is in a known "good" state, and with the varied versions (2.1, 2.5, etc.), it's quite possible that some of the issue could be due to the actual sequence.

And perhaps, this translation/import issue has been less tested than some of the major features, such as layers and RGB. I know that the import of AL sequences was never as great as I would like, since I had a fair number of those sequences in my collection. I chose to "redo" those sequences and channel layouts from scratch, or at least keeping the timing with the music. I can still use my AL controllers with LSP and have for the last 3 years.

One other note - the 16 universe limit of the advanced version is not based totally on Universe count, but is a 8192 channel limit, I believe. You can have lots more than 16 universes with 8192 channels if you are not using the full 512 channels of a universe. I've segmented my display and sometime use much less than 512 on a given segment. Of course, that is changing this year with lots more RGB.

These are all good points Mark. If you (or anyone reading this) have David's ear, I would be more than willing to be a crash test dummy for importing Vixen sequences. I can do 2.1 or 2.5, doesn't matter, I know my sequences are in a known good state, etc. I have e-mailed him once through the LSP web site to help test and was not taken up on my offer - which is okay, it is his choice and I hold no ill will towards him or his product. There are things I really like about LSP, but having spent well over 200 hrs on sequences, I am not about to start over with my sequencing. But, I bet the Vixen importers could be potentially won over, at least until Vixen 3.0 ships. Got to love competition, it makes better products. -- John


Reply
Posts: 972
(@dmoore)
Noble Member
Joined: 17 years ago
N7XG wrote:I think this other thing that annoys me is that I offered to help test and he declined. In fact several of my email were just ignored. I am concerned that this pattern will not change.

I also suspect that many of the problems I was having with LSP ver 1.8 are still there.

I think if there were understandings of what is occuring "behind the scenes" it would make more sense as to why you did not receive a response.

It really disappoints me when someone makes a statement about the reliability without having fully tested it. I ran my 2010 show in LSP 1.8 with 2,800 channels and I won't kid you that it was hard to work around some of the issues. I personally commited to LSP 2.0 about 40% of the bug reports and while I know it is not a 100% perfect product, it has made MAJOR strides over 1.8 in terms of quality.

Could I get you to simply go to screencast-o-matic.com and do a sreen recording of your issues(s) so that we can document them in the bug tracker so they can be resolved? The complaints just don't get the bugs solved - documenting and reporting them does.

David


Reply
Posts: 972
(@dmoore)
Noble Member
Joined: 17 years ago
dirknerkle wrote:Just as a test last night, I imported a working Vixen sequence, configured the controller, verified with the controller test that it was correct, turned on the outputs and ran the sequence. Nothing worked except the audio. This was exactly the same experience I had with version 1.8, so as far as the end result is concerned, it doesn't appear that much has changed.

Are you willing to either document (screencast-o-matic.com) the issue or let one of us remote in and work with you to resolve the issue?


Reply
Page 4 / 9
Share: