E1.31 and Amazon Ec...
 
Notifications
Clear all

E1.31 and Amazon Echo

2 Posts
2 Users
0 Reactions
2,312 Views
Posts: 2
Topic starter
(@railgun)
Active Member
Joined: 10 years ago
[#45489]

This seems more like a SW question than anything else. Hopefully someone has thought of this already, or can point me in the right direction to get something like this setup. I'm by no means a SW engineer and certainly don't code at all. Maybe it would be easier than I think it is, but time will tell.

In short, I have an Alphapix controller for some lights along the roof line of the house. I also have a few lights within the Philips Hue world. And I also have an Echo Dot.

I want to install some LED strips under the railings of some balconies around the house. Separate strips outside of bedrooms that will act as path lighting along that side of the house, and another strip along a second floor balcony just for ambient lighting. I'm thinking ahead in that I want something addressable to integrate into the existing E1.31 controller for use around holidays and the like, so the Hue solution is out given it's lack of individual LED control (something along the lines of this) . But I also want to easily control it in the context of an on/off switch for normal usage, and leveraging the Alphapix controller, as far as I know, won't work like that in its current incarnation. While I know there are some apps that exist to control such solutions, I don't want to start having a multitude of disparate control systems.

That being said, is there such a product that will essentially be a bridge that the Echo will see/control for an sACN controller that requires a minimal amount of programming? In this case, all I need that to do is say turn this channel (light/location/whatever I define) on/off at whatever settings (warm white for example) and that's all. The Alphapix controller would ultimately be the master controller.

Hopefully this isn't painfully obvious. I've searched a bit here specifically for the Echo, but not a lot came back.

Thanks in advance!!


1 Reply
timon
Posts: 2149
(@timon)
Noble Member
Joined: 16 years ago

I just moved the house lighting controller from Vera to HomeSeer's HS3. I was think about a plugin to control DMX lighting. The problem is it will require mapping files since there is no way HS3 can handle thousands of channel so one will have to map to large blocks. I'm also worried that E1.31 protocol would be too complex for the plugins although Serial DMX would be more easily doable.

Oh, forgot, the HS3 can be controlled through the Echo.


Reply
Share: