are there any plans or workings to incorporate a USB dongle to run with Vixen?
what i would like to do is use USB port(s) to run my display. is this possible?
Hi:
USB has a distance limitation of about 16 feet, which is very short when trying to use it to drive displays. I found this from experience with a printer. I live in a motorhome and the printer is shared with my wife. We have to move the cable from one computer to the other. If I got that cable length over about 15 feet, I started getting printing errors or it wouldn't print at all. Maybe I should have gone to a wireless printer?
I have not heard of any such project for a Vixen dongle, but there may very well be one in the mill somewhere.
Most of the newer computers don't have a RS232 serial port, so this does become a problem, but I don't think USB would be a wise choice. Using a USB to RS232 or RS485 converter is the way to go.
thats true,
however, one can place first board (say ren64), and then run ssr's within the limit. then run additional boards off the first ren64.
question:
is there a windows version of D::lite software?
the only one could find by using Google was a mac version.
It would be easy enough to develop this.. Just simply add a FTDI 232RL Chip on the front end of the renard..
What's the difference to using any USB to RS232 (or better yet RS485) adapter? These can be picked up fairly cheaply, and you get the same net result (and the option to be serial or USB.. versus tying yourself to the one protocol).
Hi:
I agree Labrat. I don't see any advantage to using USB and its' restrictive distance. Cables still have to be run and RS485 is the way to go. Unless we use DIRKNERKLES' wireless adapters, but that is still equivalent to RS485.
If the host computer doesn't have a serial port, then a cheapy converter will have to be used, but that has been no problem, as many will attest to.
If chips are added to the Renard, then that is just one more thing to go wrong or foul up in the protocol. Besides that, boards have to be designed and added plus a possible plug-in for Vixen.
I think the tried and true proven methods are best for what is to be accomplished.
Sorry, Keebler, but if it ain't broke, don't fix it.
Adding an FTDI chip (or module) to the front end of a Renard board is NOT a big deal, so go for it if that is what you want. There will always be difficulties and nay-sayers, but don't let that stop you from doing it. There will be difficulties or drawbacks to this (the FTDI chips are fine-pitch SMD parts, the USB modules are relatively expensive, there are distance limitations, and you may want to add isolation), but none of these should be over-whelming. And, for the record, you do not need a new Vixen driver with the FTDI chips unless you try really hard to do things that are out of the ordinary.
P. Short wrote:Adding an FTDI chip (or module) to the front end of a Renard board is NOT a big deal,
Exactly its not a big deal at all.
so go for it if that is what you want.
yes, something to remember folks, you do not need the permission of everyone else at DIYC to build somethign different!
LabRat wrote:What's the difference to using any USB to RS232 (or better yet RS485) adapter? These can be picked up fairly cheaply, and you get the same net result (and the option to be serial or USB.. versus tying yourself to the one protocol).
this seems like the best plan.
i have serial to rs486, but how can this be configured to DMX?
i found several schematics for usb to dmx dongles including an open source driver on google.
