Odd Ren48LSD Proble...
 
Notifications
Clear all

Odd Ren48LSD Problem

12 Posts
4 Users
0 Reactions
3,541 Views
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

The Ren48LSD has exactly the same com circuit as the RenSS series. There is an "RS232" jumper which is akin to "JP1" on the SS. There is also a "TERM" jumper but that is not needed.


Reply
klyneshouse
Posts: 230
(@klyneshouse)
Reputable Member
Joined: 16 years ago
budude wrote:Snubbers will not help things when using the LSD.

I had the same frequent misfirings on the LSD 5050 strips, - somehow coming off the new 2011 built SS's preceding it ???
By fixing the other SS"s misfirings, the LSD misfirings went away 2 fold+ from the same SS remedy as others suggested.

To add, the same channels are duplicated on another standalone LSD (remote/wireless) - they do not seem to produce the unwanted misfires.(ever)

To clarify further, the snubbers are to only whoof out only 120V leds strands if you have them. Not for the LSD directly anywhere.
See the thread links to multiple other links on how/where to install them.
My problem may not be your same problem but everyting sounds really familiar.

Id be interested to see if any others get/got downstream puking from newer SS into other non SS boards.
Also moving it to first in line or off an older board as budude suggests should do the trick if the above is what is happening.


Reply
Posts: 261
Topic starter
(@hunter310)
Reputable Member
Joined: 17 years ago

Well, sadly, nothing has changed moving the order. In fact, it still occurred and even though the re-order was made, the 2-24ss's that were moved to the last positions didnt work properly. Odd thing was they showed up in the Adj. Preview OK, but when comm happened to them, they didnt act the way they should have. I changed the order to put the LSD behind a known good SS16 (from last year's show) and then the LSD, then SS24-1 and SS24-2 (which has pretty much all leaping arches on both of them using incands.).

Comm wise, I went from:
SS16 J2 (from earlier in chain) to LSD IN via SS16 J1
LSD IN to SS24-1 via LSD OUT
SS24-1 J2 to SS24-2 J2 via SS24-1 J1
SS24-2 ended chain

I have arches that leap from the beginning and their incands flashed with the LSD events. Regardless, as soon as LSD events fired, the random ghosting occurred ONLY on the LSD 5050's.

I am not sure what else to try. I have all four controllers (in CG's) in a wooden box so all the cables come up through two holes. If it is because the extension cords are too close together, I guess I will have to pull them all out and re-wire the setup and have the CG's sitting outside on the lawn (which is a wife problem). :wink2:

I also meant to add that all other events are working fine, including the SS24 leaps. Only the LSD board seems to be mis-firing.

Anymore insight would be greatly appreciated.

Thanks,

Steve E.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

A couple things to try - did you try a new data cable to the LSD? Can you swap the two RS485 chips around (be very careful if you do not have spares). Can you try plugging the DC supply for the Ren48LSD into a different outlet from the other Rens (I realize this might not be convenient but it's just for testing) OR plug it into the same outlet as the other Rens if it isn't. I don't suspect PIC/board issues so much since you see it on different ports and other half of the board.


Reply
Posts: 261
Topic starter
(@hunter310)
Reputable Member
Joined: 17 years ago
budude wrote:A couple things to try - did you try a new data cable to the LSD?

Yes...same result.

budude wrote:
Can you swap the two RS485 chips around (be very careful if you do not have spares).

I will try in the morning. That is something I dont want to do by the light of a flashlight in 25 degree temps with a brisk wind.

budude wrote:Can you try plugging the DC supply for the Ren48LSD into a different outlet from the other Rens (I realize this might not be convenient but it's just for testing) OR plug it into the same outlet as the other Rens if it isn't.

I am pretty sure I have done that as well, but I'll tack in on my morning list to do.

Would it matter to separate the the LSD completely and make it number one in the chain. Based on my previous attempt at re-ordering I am not sure I will be successful anyhow. What I have resorted to is editing my sequence that it is the worst on down to little to no arches firing so the LEDs dont fire. The interesting thing is, during another test (before yet another failure of something) it still flickered (though not as bad though) without the arches even on. The other sequences are all fast songs so the flickers and flashes look like part of the show....even though they are not.

Thanks,

Steve E.


Reply
Page 2 / 3
Share: