Friends,
I am having an strange problem with my Ren48LSD Board. First off the background:
I am only using ports 1-6 with SMD 5050 LED strips. Each port only has three pixels (one has only two) on it. A 12V 1.5amp Wall Wart power supply is providing power to ports 1-6 through DC1. DC2, for ports 7-12 is NOT connected. The rest of my setup is various SS8s, SS16s, and SS24's in the mix. The LSD board is the last board in my chain.
Now the issue:
During my individual channel tests, and even on my bench testing, everything was working great. Now that I am out in the yard with everything hooked up I am seeing the oddity.
When a sequence runs, say firing port 5, Red and Blue @ 100%, I get random firings from the other ports and colors. It looks as if the channels are sequenced to be on random, but there is nothing but the red and blue channel coded in Vixen.
I have tried moving all ports 1-6 events to ports 7-12, and the problem follows. I have rebooted the board, ran manual channel tests, and even recreated a sequence with just those (and only those) channels firing. That seemed to fix the issue but of course all my other show elements are gone.
Any thoughts as to what could be going on? Show date is creeping up on Monday so I will be at it again tomorrow to try to figure this out. Tonight got too cold and windy, so I had to revert to asking for help. :blush:
Thanks,
Steve E.
I have practically the same setup, 48LSD at end of chain of several SS boards and had the same issues.
These only mis-fire while other upstream channels are sweeping from ~40-60% intensity but at a repeatable fashion.
It seems to worsen the more down stream a controller is.
It seems my very noticible 5050 strips were associated with this epic thread and many other threads with similar issues.
Here is what i tried which dramatically reduced this ~90% for me.
I ensured all my SS boards were all lined up on the same 120/Neutral from the breaker box. Criss crossing these seemed to make this much worse.
Added snubbers, glade/renuzit plugins @ 9.2 K ohms to every 120 led channel.
Seperated distance of contollers, power cords as much as resonably possible.
Unfortunately i had to remove sequecing some exotic 100 channel "candle flicker" from one song as all the others were off and it was just too obvious.
I will be trying more stuff tonight like baluns, battery backups and monitoring another channel duplicated remote wireless 48LSD with floods on battery for duplication of this mis-firing.
klyneshouse wrote:I
Added snubbers, glade/renuzit plugins @ 9.2 K ohms to every 120 led channel.
Need help understand this better. In my situation, I have my 5050's connected via RJ45s. So by adding the "snubber", I assume you mean on the power in before it hits the DC 1 port. I don't see how to do that on the specific RJ45s.
What about baluns on the cables coming out of each cable on ports 1-6? Will that help any, or is it a crap shoot at this point?
Thanks,
Steve E.
Snubbers will not help things when using the LSD. Is it possible for you to move the LSD to a different spot inline (at least for testing purposes)?
Brian,
I guess I can do that. Currently it is last in line, right before my two SS24's. Both SS24's are being used for leaping mini arches (4 segments - 100 minis each segment) so they have to fade. My only thought of keeping the LSD at the end is based on previous experience. Last years show were all SS series based and worked fine, so I thought I would add the additional SS boards I bought this year in line and then the LSD last. However, the LSD board should work anywhere in the chain, so I'll try that. I assume there are no shunts or jumpers to add to the LSD to have it communicate downstream.
Thanks,
Steve E.
