Hi I have a Raspberry Pi model 3 with newest FPP installed. I want to communicate with a MCP4131 chip ( https://www.digchip.com/datasheets/parts/datasheet/295/MCP4131-pdf.php ). According to Raspberry pi documentation the SPI interface must be enabled ( https://www.raspberrypi-spy.co.uk/2014/08/enabling-the-spi-interface-on-the-raspberry-pi/ ). Is this done with FPP installed? if not can you give me instruction on how to do this?.
Do anyone have experience with this kind of communication, do you have some script and maybe experience to share?
The SPI interface is enabled using the piconfig utility. FPP may be using the SPI interface but if you are not using pixels on a PI Hat then there should be no issue.
MartinMueller2003 wrote:The SPI interface is enabled using the piconfig utility. FPP may be using the SPI interface but if you are not using pixels on a PI Hat then there should be no issue.
Could you give me some more details on where to find the piconfig utility?
thus site explanes the utilityhttps://www.raspberrypi.org/documentation/configuration/raspi-config.md&ved=2ahUKEwjasrnDpdDsAhU2mHIEHTvhB6IQFjAAegQIAxAB&usg=AOvVaw1SnP6HFRyNHGAJTCt9ZNY D"> https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.raspberrypi.org/documentation/configuration/raspi-config.md&ved=2ahUKEwjasrnDpdDsAhU2mHIEHTvhB6IQFjAAegQIAxAB&usg=AOvVaw1SnP6HFRyNHGAJTCt9ZNYD
