FPP on Kulp BB (pla...
 
Notifications
Clear all

FPP on Kulp BB (player/remote question)

4 Posts
3 Users
0 Reactions
1,642 Views
Posts: 3
Topic starter
(@cjay904)
Active Member
Joined: 7 years ago
[#55215]

I am getting my display on line and I want to have the in sync. I have two identical controllers They are both Kulp k8-B boards and they work fine if I have them set up as standalone where each plays a sequence by its self. When i try to get them to sync, that is where it all goes down.

mega1 output

so I have them named Mega1 (Player) and mega2 (remote). I am testing a 90 node star on each of them. I set up the output channel as 1 - 270 (90X3) for each of them. Then i discover them in XLights and they are set up as universe 1-1 and 2-2. But when I go to play them and make one stat yellow and one red, i can not get it to work.

Any help would be great.

mega2 output
xligts control

multi sync

3 Replies
Posts: 40
(@swanny)
Trusted Member
Joined: 6 years ago

They don’t have any channels assigned to them ( it Should be [1-270] and [271-xxx] )

I manually set channels when this happens. Then set xLights to not use pixel numbers and that works but it’s a hack. I’m looking forward to hear how to properly fix it 🙂

Sent from my iPhone using Tapatalk


Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago

Have you selected the player to send out multisync packets?


Reply
Posts: 40
(@swanny)
Trusted Member
Joined: 6 years ago

One of the trees is setup as a player instead of a remote. That will effect that tree..

Sent from my iPhone using Tapatalk


Reply
Share: