I have just gotten to work, but will try this tonight when I get home.
Thank-you
Let me throw in 2 cents worth of something. I recall past FPP posts stating the second gateway should be left empty....so try by removing gateway for wlan0. Also, the DNS server is best if you use Googles DNS Server of 8.8.8.8. Or Comcast of 75.75.75.75
I have the DNS as 8.8.8.8
I will try that tonight
MartinMueller2003 wrote:It sure looks like something odd is afoot. I am going to suggest a test configuration (you may have done tis before but now that things are on separate subnets we get some useful info).
- Disconnect everything from the PI Eth0 interface.
- PI connected through WiFi to a computer on the 192.168.1.x subnet and has its browser monitoring the PI using its WiFi address
- You indicated this works.
Connect a separate computer to the PI Eth0 interface (with a manual IP in the 192.168.2.x range) and try to access the FPP web page using a browser.
- Does the computer talking via the WiFi interface still have control of the UI?
- Does the Eth0 connected computer have control of the UI?
Martin,
I know we are meeting tomorrow, but I wanted to try this tonight. Tonight, I cannot get on the it via wifi at all. I went into my router and it shows that it is connected via wifi
so i don't know whats going on.
mrGrumpy wrote:Let me throw in 2 cents worth of something. I recall past FPP posts stating the second gateway should be left empty....so try by removing gateway for wlan0.
I tried this and nothing changed, but thank you for the idea
OMG.... Day 7 and we finally have success.
Thank-you so MikeKrebs.
(doing a happy dance):biggrin:
ok, sorry to ask for more but I understand because the E682 is on a different subnet (.2) I cannot talk to it through my laptop anymore. I understand that there is some way to see the E682's page through the Pi, but not sure how to do that. I have the check box turned on for "Enable Routing between network interfaces" just not sure how to see the E682's page.
Thanks again sooooooo much to all who helped me get this far.
Ray
I believe you need to configure a proxy in the FPP
I copied this from the manual found here
BTW Thanks for posting this question as it forced me to learn something today . :thup2:
I will look at this when I get home tonight, thank-you
bcer960 wrote:ok, sorry to ask for more but I understand because the E682 is on a different subnet (.2) I cannot talk to it through my laptop anymore. I understand that there is some way to see the E682's page through the Pi, but not sure how to do that. I have the check box turned on for "Enable Routing between network interfaces" just not sure how to see the E682's page.Thanks again sooooooo much to all who helped me get this far.
Ray
Give this a shot. Get a command prompt on your PC as administrator. Then type in the following command:
route -p add 192.168.2.2 mask 255.255.255.0 192.168.1.101
This command tells your main router not to go to the internet to find the IP of your E682 but rather find it through your RPi. The -p makes the route persistent so that it is still there when you restart your computer. Otherwise the route only lasts until you restart.

